Front SES Suspension Kit

Features:

• Reduces front-end sag and sway
• Patented Aeon hollow rubber springs
• Progressive spring rate as load increases
• 6,000 lb rated capacity
• Comfortable ride, loaded or unloaded
• Zero post-installation maintenance
• DIY installation in under 30 minutes
• Overall kit height of 5.00"
• Includes mounts, steel disks, and hardware

Keep Your Front End Level Under A Plow Or Heavy Bumper

A snowplow, a winch bumper, or a stack of heavy aftermarket accessories puts all of that extra weight on the front two tires, and your truck lets you know about it. The nose sags, the steering gets vague, and the front suspension can bottom out hard enough to cause real damage. Timbren's Front SES Suspension Kit is built to fix that problem by leveling out your front-end load so the truck stays controlled and predictable. The kit uses patented Aeon hollow rubber springs with a progressive spring rate, which means they push back harder as the load increases. That progressive action works against squat, sway, and roll, so you stay in control instead of fighting the wheel. You also get a comfortable ride whether the truck is loaded or empty, since the rubber springs do not make the suspension feel stiff when the weight is gone. There is nothing to maintain after the install, and Timbren says you can install the kit and get back to work in under 30 minutes, right from your driveway. For anyone running a plow or a heavy front bumper on an HD Ram, this is a simple way to take the strain off the front end.

Aeon Rubber Springs Engineered For Progressive Front Axle Support

The Timbren DF25004F Front SES Suspension Kit is engineered for 2019-2026 RAM 2500 and 3500 4WD trucks, along with Ram 3500 Cab and Chassis models. The kit is built around two patented Aeon SES suspensions, which are hollow rubber springs that deliver a progressive spring rate under load. Each spring is paired with a rubber mount and a steel mounting disk, and all necessary hardware is included. After installation, the rubber spring should be in contact with the front axle. The kit is rated for a capacity of 6,000 pounds and has an overall kit height of 5.00 inches. Unlike air-based systems, it needs no post-installation maintenance, with no air lines or pressure to monitor. Timbren points out that adding this upgrade increases the spring rate but does not increase the truck's Gross Vehicle Weight Rating, so the load must never exceed the GVWR set by the manufacturer.

Fitment: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026 RAM 2500/3500 4WD/RAM 3500 Cab & Chassis

Notes:

• Does not increase the GVWR, never exceed the manufacturer's Gross Vehicle Weight Rating
• Front kit only, designed to support front-end weight from plows and heavy accessories
• After installation, the rubber spring should be in contact with the front axle
• Rated capacity is 6,000 lbs, overall kit height is 5.00"
• Requires no post-installation maintenance
• Includes two Aeon SES rubber springs, two rubber mounts, two steel mounting disks, and all necessary hardware
• Manufacturer states the kit can be installed in under 30 minutes

Install Instructions