Z36 Truck & Tow Front & Rear Brake Upgrade Kit

Features:

• Front and rear brake kit in one box
• Carbon-fiber ceramic severe-duty brake pads
• Drilled, slotted, zinc plated rotors
• Stainless steel shims for quieter braking
• Low-dust formula reduces brake dust
• Premium stainless steel hardware included
• New pin bushing kit where applicable
• Hi-temp brake lubricant included
• Built for towing, hauling, and off-road
• Bolt-on installation

Stop A Heavy Load Without Cooking Your Brakes

A RAM 2500 asks a lot from its brakes. You are slowing a heavy truck, a loaded trailer, or both, and the factory setup can run out of steam on a long downhill grade. PowerStop built the Z36 Truck and Tow Brake Upgrade Kit for trucks that work hard during the week and play hard on the weekend. The pads use a low-dust ceramic formula reinforced with carbon fiber, which gives you severe-duty stopping power without making the truck harder to live with every day. They are paired with drilled and slotted rotors that help keep brake temperatures down by pulling heat away, which is exactly what you want on a long mountain descent. The rotors are zinc plated too, which helps protect against rust and corrosion. Stainless steel shims on the pads help with heat dissipation and keep braking virtually noise free. Because this kit covers both the front and the rear axle, you are upgrading the whole system at once instead of leaving one end behind. Everything comes in one box, including the hardware, so you can get the job done without a second trip to the parts counter.

Floating Rotors And A Complete Hardware Package For Both Axles

The PowerStop K8792-36 is a front and rear brake upgrade kit built for 2019-2025 RAM 2500 trucks. Each axle gets Z36 carbon-fiber ceramic pads with stainless steel shims, along with drilled, slotted, and zinc plated rotors. The front rotors are vented floating rotors measuring 14.2 inches (360.0mm) in diameter with a 4.0 inch (102mm) height and a nominal thickness of 1.5 inches (39.0mm). The rear rotors are also vented, measuring 14.1 inches (358.3mm) in diameter with a 4.9 inch (125mm) height and a nominal thickness of 1.3 inches (34.2mm), and they use a drum-in-hub design. Both axles use an 8 lug pattern on a 6.5 inch (165.1mm) bolt circle with a 4.8 inch (123mm) hub hole. The kit includes premium stainless steel hardware, a new pin bushing kit where applicable, and hi-temp brake lubricant. PowerStop recommends the kit for towing, hauling, big tire upgrades, mountain driving, and off-road use.

Fitment: 2019, 2020, 2021, 2022, 2023, 2024, 2025 RAM 2500

Notes:

• Complete kit covers both the front and rear axles
• Includes brake pads, rotors, stainless steel hardware, and hi-temp brake lubricant
• New pin bushing kit is included where applicable
• Rotors are drilled, slotted, and zinc plated, and pads use carbon-fiber ceramic
• Rotors are 8 lug on a 6.5" (165.1mm) bolt circle, confirm your truck's lug pattern before ordering
• Rear rotors are a drum-in-hub design
• Recommended by PowerStop for towing, hauling, big tire upgrades, mountain driving, and off-road use

Install Instructions