Features:
- Ride height 2.5-3" of front lift adjustable coilovers
- Fits 2023 Ford F250/F350 Powerstroke 4WD
- Front secondary shocks for increased damping
- Bolt-in design fits OE coil bucket location
- CDC valves with 10 compression settings
- Remote reservoir front, piggyback reservoir rear shocks
- Vehicle-specific shock valving
- Shocks are fully rebuildable and revalvable
- Adjustable track bar included
- Dual steering stabilizer kit included
- Reduced body roll, improved ride dynamics
- Lifetime guarantee against spring sag or breakage
- FK rod end bearings for longevity
Add A Second Shock To Each Front Corner For More Damping And More Control
A lifted truck only feels right when the suspension can control the extra height and weight. That is the idea behind the ICON Stage 5 system for the 2023 Super Duty. It starts with ride height adjustable coilovers that lift the front 2.5 to 3 inches on diesels without the Tremor package. Then it adds a secondary shock at each front corner for increased damping. ICON says a coilover conversion increases the truck's overall damping ability, and you set the ride height yourself. CDC valves on the front coilovers, the secondary shocks, and the rear shocks give you 10 compression settings, from soft to hard. You can tune the ride from the outside without taking anything apart. ICON says you also get less body roll and better on and off road ride dynamics. For a truck that tows, works, and heads off road, this is the setup built for it.
Front Secondary Shocks, Resi Doubler Mounts, And Ten Compression Settings Broken Down
The ICON K63165 is a Stage 5 coilover conversion system for 2023 Ford F250 and F350 4WD trucks with the Powerstroke. The front uses ICON 2.5 Series CDCV remote reservoir coilovers with adjustable ride height. They are based on ICON's 2.5 VS Series shock line, so ICON engineered coil springs, FK rod end bearings, and vehicle specific valving come standard. The coilover bodies are corrosion resistant and CAD plated, with 7/8 inch shafts. Stage 5 adds 2.5 Aluminum Series CDCV remote reservoir secondary shocks at the front, with one piece, impact extruded aluminum cylinders. A 7.5 inch resi doubler mount kit is included in the system. The rear shocks are 2.5 Aluminum Series CDCV piggyback reservoir shocks, compatible with 0 to 3 inches of rear lift over stock. The package also includes an adjustable track bar and a dual steering stabilizer kit with two ICON 2.0 Aluminum Series stabilizers. Installation requires removing the factory coil centering cup, and the truck needs ADAS recalibration afterward.
Fitment: 2023 Ford F250/F350 Super Duty Powerstroke 4WD w/ 2.5-3" Front Lift
Notes:
- Fits 4WD models only
- Fits 2023 trucks only, will not fit 2024 models
- Will not fit F-350/F-450 Cab and Chassis models
- Diesel front lift is 2.5-3" over stock without the Tremor package and 1.5-2" with the Tremor package, heights are for a stock equipped vehicle
- Removal of the coil centering cup in the factory coil bucket is required for installation
- Requires recalibration of Advanced Driver Assistance Systems (ADAS) after installation
- In rare cases, a 2.6 degree alignment cam is required on one side of the vehicle for the proper caster split
- ICON track bar bracket part number 64039 is also recommended to correct bump steer geometry, sold separately
- Optional brake line kit part number 61111 is available for those who don't want to bend the factory steel lines, not necessary for a complete install
- Installer must make sure there is adequate clearance between the wiring harness, the coilover reservoir, and other components in the upper front passenger wheel well, contact ICON Customer Service if adequate clearance cannot be achieved
- Included rear shocks are compatible with 0-3" of rear lift over stock
- Factory wheels and tires fit, ICON recommends 35" x 12.50" tires, and 37" x 12.50" tires may fit but fender trimming and modifications will be required
- Package includes the bolt-in coilover conversion kit with alignment cams, front secondary shocks, 7.5" resi doubler mount kit, rear CDCV piggyback shocks, adjustable track bar, and dual steering stabilizer kit with two stabilizers
- Lifetime guarantee against sagging or breakage of the ICON engineered coil springs
- California Proposition 65 warning applies to this product
- Product images may be representative
System Components:
- 61720C (qty: 1) | 05-23 F250/F350 4WD 2.5-3" 2.5 VS RR CDCV BOLT IN CO CONVERSION KIT W/ CAMS
- 65002 (qty: 1) | 23-25 FSD DUAL STABILIZER KIT
- 36511 (qty: 2) | 99-25 FSD 4WD STABILIZER (DUAL OPPOSING) 2.0 VS IR
- 64038 (qty: 1) | 17-25 FSD ADJ TRACKBAR KIT
- 67800CP (qty: 1) | 05-25 FSD 4WD 0-2.5" FRONT 2.5 VS RR CDCV PAIR
- 611003 (qty: 1) | 2.5 RESI DOUBLER MOUNT 7.5" KIT
- 37705CP (qty: 1) | 99-25 FSD 0-3" REAR 2.5 VS PB CDCV PAIR
Install Instructions