Increases front wheel travel approximately 25 percent
Dual rate coils improve vehicle control
Vehicle specific shocks improve ride quality
Piggyback reservoirs support consistent shock performance
Adjustable track bar improves axle positioning
Fully rebuildable and revalvable shocks
Aluminum shock bodies resist corrosion
Supports recommended 35 inch tires
Ideal for towing and off road use
Made in the USA
Find The Sweet Spot Between Work And Adventure
Your Super Duty can spend Friday pulling a trailer and Saturday exploring a rough back road, so its suspension should feel comfortable doing both. The ICON K62513 Stage 3 Suspension System gives 2017-2019 Ford F250 and F350 Super Duty 4WD trucks 2.5 inches of front lift for a more level stance while improving ride quality and suspension performance. ICON dual rate coil springs provide controlled support across changing terrain, while vehicle specific shock tuning helps the truck feel composed on pavement without holding it back when the surface turns rough. Approximately 25 percent more front wheel travel gives the suspension additional room to absorb bumps, ruts, and uneven job site roads before that movement reaches the cab. The recommended 35 by 12.50 inch tire size also gives you room to build a more capable setup without going to the height of a larger suspension lift. Piggyback reservoir shocks are especially valuable during spirited off road driving, where additional fluid capacity helps manage heat and maintain consistent damping through repeated suspension movement. Put it all together and you get a well rounded suspension package for a truck that still needs to tow and work during the week but deserves some fun when the pavement ends.
Better Suspension Control Starts With Matched Components
Rather than treating springs and shocks as separate upgrades, ICON engineers the K62513 Stage 3 system so its major suspension components work together on the 2017-2019 Ford F250 and F350 Super Duty 4WD. Dual rate front coil springs establish 2.5 inches of lift, while alignment cams help achieve the proper suspension alignment after the change in ride height. ICON 2.5 inch Aluminum Series piggyback reservoir shocks are used at all four corners and receive vehicle specific tuning to deliver controlled damping across a broad range of driving conditions. Their one piece impact extruded aluminum bodies provide corrosion resistance, while substantial 7/8 inch shafts contribute strength for demanding suspension use. The shocks are fully rebuildable and revalvable, which gives owners a serviceable platform that can be maintained or retuned as the truck's needs evolve. An adjustable track bar helps properly position the front axle beneath the truck, and FK rod end bearings provide low deflection and dependable articulation at this critical suspension connection. With rear shocks designed for zero to three inches of rear lift and an optional ICON track bar bracket available to further correct bump steer geometry, the Stage 3 system provides a carefully developed foundation for drivers who expect precise suspension behavior both on road and off.
Fitment: Ā 2017, 2018, 2019 Ford F250/F350 Super Duty 4WD w/ 2.5" Lift
Notes:
Fits 2017-2019 Ford F250 and F350 4WD
Springs are rated for diesel engines only
Not compatible with F350 Cab and Chassis
Not compatible with all factory wheel setups
Lower offset aftermarket wheels are recommended
Recommended tire size is 35 x 12.50 inches
Larger tires may require trimming or modifications
Rare cases may require 2.6 degree alignment cam
Optional brake line kit 61111 is available
Factory steel brake lines may require bending
Track bar bracket 64039 is recommended
Rear shocks support 0-3 inches lift
Technical Notes:
OEM Wheels & Tires Fitment: Not compatible with all available OE wheel/tire combinations. Aftermarket wheels with lower offset/less backspace recommended.
Recommended Aftermarket Tires: 35" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.)
APPLICATION NOTE #6: Springs Are Rated For Diesel Engines Only
APPLICATION NOTE #55: Shocks Are Fully Serviceable. Coilover Heights Indicated Are For A Stock Equipped Vehicle
APPLICATION NOTE #119: Rare Cases Require A 2.6 Degree Alignment Cam On One Side Of Vehicle For Proper Caster Split
TECH NOTE: Compatible with 4WD models only
TECH NOTE: Brake line kit (Part # 61111) is optional for end users who do not want to bend the factory steel lines or are looking for a braided stainless upgrade (not necessary for complete install)
TECH NOTE: Not compatible with F-350 Cab & Chassis models
TECH NOTE: ICON track bar bracket part # 64039 is also recommended to correct bump steer geometry
TECH NOTE: Included rear shocks are compatible with 0-3" of rear lift over stock
System Components:
62510 (qty: 1) | 05-19 FSD FRONT 2.5" DUAL RATE SPRING KIT
67700P (qty: 1) | 05-25 FSD 4WD 0-2.5" FRONT 2.5 VS PB PAIR