HP Tuners ECM-00-E90-K Upgrade Kit | 2019-2023 GM Sierra/Silverado w/ E90 ECM and/or T93 TCM

Features:

• Allows tuning of E90 ECM and T93 TCM
• No ECM or TCM removal required
• Compatible with 2019-2023 GM Silverado and Sierra
• Supports 5.3L and 6.2L gas engines
• Supports 3.0L Duramax and 6.6L L5P diesel engines
• Designed for non-Global B GM vehicles
  
• No IMMO or crank relearn needed
  
• Includes all required HPTNet cables and upgrade box

Unlock Real Tuning Power Without Pulling A Single Module

If you’ve been waiting for an easier way to unlock serious performance potential in your 2019-2023 GM truck, this is it. The HP Tuners E90/T93 Upgrade Kit gives you full access to tune your E90 ECM and T93 TCM without ever removing them from the vehicle. No more sending out controllers or worrying about damaging connectors during removal. Just plug in, upgrade, and get tuning right in your own garage or shop. Whether you’re dialing in shift points, adjusting fueling, or building out a custom tune from scratch, this kit gives you everything needed to get started. It’s the fastest way to take full control of your truck’s performance, and it saves time with quick upgrade and write times that let you move from install to tune in minutes. If you already have an MPVI3 and access to VCM suite, this kit is the missing piece that gets you in the driver’s seat of your own performance!

Designed For Direct Upgrades On Supported GM Platforms

The HP Tuners ECM-00-E90-K Upgrade Kit is built specifically for GM vehicles equipped with the E90 ECM and T93 TCM, including 2019-2023 GM models and select HD trucks with the 6.6L L5P. It supports both gas and diesel engines and is designed for non-Global B platforms only. This kit includes all required components to complete the upgrade in under 20 minutes per module, including HPTNet cables, an upgrade box, and all necessary connections. Once upgraded, users can expect some of the fastest write times in the industry, around 6 minutes, helping speed up the tuning process and reduce downtime. The upgrade does not require any IMMO or crank relearn steps and avoids the need for replacement ECM procedures. Making it a seamless process from start to finish. To use this kit, you must have an MPVI3 device and the latest version of VCM Suite installed. Licensing credits are required for tuning but are sold separately, allowing you to customize based on your vehicle’s specific needs.

Fitment:  2019, 2020, 2021, 2022 GM Sierra/Silverado 1500 w/ E90 ECM and/or T93 TCM

• 2020, 2021, 2022, 2023 Chevrolet Silverado 2500HD/3500HD (6.6L L5P) 10 speed Allison Transmission w/ T93 TCM

GM E90 ECM Support:

• 2019-2022 Chevrolet Silverado 1500 & GMC Sierra 1500 (5.3L & 6.2L V8 – L84/L87)
• Pre-facelift models (non-Global B)

GM T93 TCM Support:

• Various 2019+ GM vehicles equipped with 8-speed and 10-speed transmissions (non-Global B), including:
• 2020+ Chevrolet Camaro
• 2019-2022 Chevrolet Silverado 1500/GMC Sierra 1500 (5.3L, 6.2L Gas, 3.0L Duramax)
• 2020-2023 Chevrolet Silverado 2500HD/3500HD (6.6L L5P)

Notes:

• Only compatible with GM vehicles using E90 ECM and/or T93 TCM
• Supports 2019-2022 Silverado and Sierra 1500 with 5.3L or 6.2L gas engines
• Supports 2020, 2021, 2022, 2023 Chevrolet Silverado 2500HD/3500HD (6.6L L5P) 10 speed Allison Transmission w/ T93 TCM
• Supports 3.0L Duramax and 6.6L L5P in select non-Global B models
• Not compatible with Global B vehicle architectures
• MPVI3 device and latest VCM Suite (BETA) are required
• Vehicle licensing credits must be purchased separately
• No ECM or TCM removal is required for the upgrade
• No IMMO relearn, crank relearn, or replace ECM steps needed
• Average upgrade time is approximately 20 minutes per module
• Write times after upgrade are approximately 6 minutes
• Includes HPTNet cables, upgrade cable, and upgrade box

Install Instructions