Front SES Suspension Enhancement System

Features:

• Eliminate Vehicle Squatting & Sagging
• Cushion Road Shocks
• Improve Handling
• Satisfaction Guarantee
• Lifetime Warranty

SES Suspension Enhancement System Prevent Front End Sag

As strong as the suspension is on the RAM 2500/3500, it is susceptible to damage if put through too much stress from having heavy aftermarket accessories on your front end. Instead of putting your factory suspension to the test and seeing if it makes it can handle the extra weight, you should brace it for what is coming with the 1994-2013 Ram Cummins Timbren SES Suspension Enhancement System. These progressive rate hollow rubber springs work hard to prevent front end sag that will cause damage to front suspension components and throw off your alignment. The more weight that gets put onto these springs, the harder they will push back to create a level ride and prevent bottoming out. If you already have bump stops on your front suspension, these springs are a direct replacement for them.

6,000 LB Load Capacity

The 1994-2013 Ram Cummins Timbren SES Suspension Enhancement System features a load capacity of 6,000 lb, which is a massive amount of strength to add. It is the perfect amount for being able to incorporate a new aftermarket front bumper, snowplow, or other heavy front end accessories. This does not mean that you always have to be loaded to get the superior ride quality. These hollow rubber springs offer the same feel and leveled stance even when you are unloaded. To ensure that your unloaded ride quality is consistent, you need to make sure there is a ½" to 1 ½" gap between each rubber spring and the front axle. It is hard for your truck to be stable down the road with a ton of extra weight, so these springs work to reduce body roll and sway. They also offer more cushion on your shocks when you are hitting the trails. Beyond softening the blows, these springs improve your truck's handling and increase the traction on your rear tires to create a much more controlled and safe driving experience. Whether you are hauling cargo in your truck bed, pulling a trailer, or riding unloaded on-or-off road, these springs will provide the necessary adjustments to bring the front of your truck back to the proper level.

Fitment:

• 1994-2008 Dodge Ram 5.9L/6.7L Cummins 1500 4WD Mega Cab ONLY
• 1994-2013 Dodge Ram 5.9L/6.7L Cummins 2500/3500 4WD
• 2018-2025 Dodge Ram 6.7L Cummins 2500/3500 4WD
• 1994-1999 Dodge Ram 5.9L Cummins 3500 Cab & Chassis 2WD/4WD
• 2000-2002 Dodge Ram 5.9L Cummins 3500 Cab & Chassis 4WD
• 2003-2013 Dodge Ram 5.9L/6.7L Cummins 3500 Cab & Chassis 2WD/4WD

Important Note:

• Prevents front end sag from heavy aftermarket accessories like bumpers or snowplows.
• 6,000 lb load capacity for better front-end weight management.
• Does not increase GVWR; ensure loads do not exceed manufacturer’s rating.
• Progressive hollow rubber springs improve handling, reduce body roll, cushion shocks.
• Maintains ride quality even when unloaded.
• Requires ½" to 1 ½" gap between rubber spring and front axle when unloaded.
• Compatible with 1994-2013 Ram 1500, 2500, 3500, and Cab & Chassis models.
• Direct replacement for factory bump stops, simplifying installation.
• Reduces front end sag, enhancing truck stability and handling.
• Improves traction on rear tires for a more controlled driving experience.