Zone Offroad D32 6 inch Coil Spring Lift Kit - 3.5 inch Rear Axle | 2008 Dodge RAM 1500/2500/3500 4WD Mega Cab Diesel
Zone Offroad D32 6 inch Coil Spring Lift Kit - 3.5 inch Rear Axle | 2008 Dodge RAM 1500/2500/3500 4WD Mega Cab Diesel
- Price
- $988.80
Ships From Manufacturer in 1-3 Days
Zone Offroad
Zone Offroad D32 6 inch Coil Spring Lift Kit - 3.5 inch Rear Axle | 2008 Dodge RAM 1500/2500/3500 4WD Mega Cab Diesel
Click to open expanded view
Features:
- 100% bolt-on design for easy installation.
- High-strength control arm relocation brackets correct suspension geometry and add rigidity.
Description
When you go big you can go anywhere. This 6" Lift Kit puts your truck into a class of its own, letting you clear huge 37" tires. Get the look and performance you want out of your Diesel 4WD 2008 Dodge / Ram Mega Cab / 2500 / 3500 Truck. Vehicle Fitment:- 2008 Dodge Ram 3500 4WD/Diesel
- 2008 Dodge Ram 2500 4WD/Diesel
- 2008 Dodge Ram 1500 Mega Cab 4WD/Diesel
- Fits models with 3.5" rear axle
- Front Lift Height: 6"
- Rear Lift Height: 4"
- Front Lift Method: Coil Springs
- Rear Lift Method: Cast Blocks
- Lift Type: Lift Kit
- Wheel Size: 17 x 9
- Back Spacing: 5"
- Max Tire Size: 37 x 12.5
- Wheel Size 2: 18 x 9
- Back Spacing 2: 5"
- Max Tire Size 2: 37 x 12.5
- Wheel Size 3: 20 x 9
- Back Spacing 3: 5"
- Max Tire Size 3: 37 x 12.5
- Finish: Powdercoat
- Cutting Required: No
- Accommodates Factory Wheels: See Notes
- Welding Required: No
- If your Truck has had the steering gear box changed and the sector shaft diameter measures ~1-1/2”-1-5/8” you will need ZOND8404 also with your kit.
- Check Rear Axle Diameter: This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
- Driveline Notice: Although rare, if you experience front driveline vibration, install the optional transfer case indexing ring.
- Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
- Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring.
- Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
- Wheels / Tires: Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper’s stock location.
- All Necessary Mounting / Installation Hardware
- Brake Line Brackets
- Coil Springs
- Control Arm Relocation Brackets
- Dropped Pitman Arm
- Rear Lift Block & U-Bolt Kit
- Track Bar Relocation Bracket
- Transfer Case Indexing Ring
| Property | Values |
|---|---|
| Year Ranges | 2008 |
| Make | Dodge RAM |
| Model | |
| Series | 2500/3500 |
| Engine | 6.7L Cummins |
Recommended for You
- Choosing a selection results in a full page refresh.
!