Zone Offroad D31 8 inch Coil Spring Lift Kit - 4 inch Rear Axle | 2008 Dodge RAM 2500/3500 4WD/Diesel
Zone Offroad D31 8 inch Coil Spring Lift Kit - 4 inch Rear Axle | 2008 Dodge RAM 2500/3500 4WD/Diesel
- Price
- $1,216.75
Ships From Manufacturer in 1-3 Days
Zone Offroad
Zone Offroad D31 8 inch Coil Spring Lift Kit - 4 inch Rear Axle | 2008 Dodge RAM 2500/3500 4WD/Diesel
Click to open expanded view
Features:
- 100% bolt-on design for easy installation.
- High-strength control arm relocation brackets correct suspension geometry and add rigidity.
Description
Step up to our highest lift that will let you clear 38" tires, but will still leave you in control. This coil spring and cast block lift is the easy and affordable way to create the truck you’ve always wanted. Fits Diesel 4WD 2008 Dodge / Ram 2500 / 3500 Trucks. Vehicle Fitment:- 2008 Dodge Ram 3500 4WD/Diesel
- 2008 Dodge Ram 2500 4WD/Diesel
- Fits models with 4" rear axle
- Front Lift Height: 8"
- Rear Lift Height: 5"
- Front Lift Method: Coil Springs
- Rear Lift Method: Cast Blocks
- Lift Type: Lift Kit
- Wheel Size: 17 x 9
- Back Spacing: 5"
- Max Tire Size: 38 x 13.5
- Wheel Size 2: 18 x 9
- Back Spacing 2: 5"
- Max Tire Size 2: 38 x 13.5
- Wheel Size 3: 20 x 9
- Back Spacing 3: 5"
- Max Tire Size 3: 38 x 13.5
- Finish: Powdercoat
- Cutting Required: No
- Accommodates Factory Wheels: See Notes
- Welding Required: No
- If your Truck has had the steering gear box changed and the sector shaft diameter measures ~1-1/2”-1-5/8” you will need ZOND8404 also with your kit.
- Check Rear Axle Diameter: This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
- Diesels Only! Lift springs are designed for heavier diesel models only. Using lift springs with lighter gas models may cause excessive lift and is NOT recommended.
- Driveline Notice: Although rare, if you experience front driveline vibration, install the optional transfer case indexing ring.
- Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
- Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
- Wheels / Tires: Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper’s stock location.
- All Necessary Mounting / Installation Hardware
- Brake Line Brackets
- Coil Springs
- Control Arm Relocation Brackets
- Dropped Pitman Arm
- Rear Lift Block & U-Bolt Kit
- Track Bar Relocation Bracket
- Transfer Case Indexing Ring
| Property | Values |
|---|---|
| Year Ranges | 2008 |
| Make | Dodge RAM |
| Model | |
| Series | 2500/3500 |
| Engine | 6.7L Cummins |
Recommended for You
- Choosing a selection results in a full page refresh.
!