Zone Offroad D131N 5 inch Coil Spring Lift Kit - Nitro Shocks | 2010 RAM 2500 Power Wagon 4WD
Zone Offroad D131N 5 inch Coil Spring Lift Kit - Nitro Shocks | 2010 RAM 2500 Power Wagon 4WD
- Price
- $1,009.60
Ships From Manufacturer in 1-3 Days
Zone Offroad
Zone Offroad D131N 5 inch Coil Spring Lift Kit - Nitro Shocks | 2010 RAM 2500 Power Wagon 4WD
Click to open expanded view
Features:
- 100% bolt-on design for easy installation
- Bump stop extensions properly limit up-travel, protecting your vehicle
- Heavy-duty upper and lower control arms improve strength and articulation while correcting caster
- Heavy-duty front track bar bracket correctly positions front axle under vehicle
- Steering components included to ensure smooth post-installation operation of steering system and factory-consistent vehicle handling characteristics
- Nitro Series Front and Rear Shock Abosrbers for improved off-road capability
Description
Go big and go anywhere with this 5" Lift Kit for your truck that gives you clearance for huge tires up to 36". This kit has everything you need to raise your 4WD 2010 Dodge / Ram 2500 / 3500 Truck. If you’re going to do it, do it right. Vehicle Fitment: 2010 Dodge Ram 2500 Power Wagon 4WD Quick Specs:- Front Lift Height: 5"
- Rear Lift Height: -
- Front Lift Method: Coil Springs
- Rear Lift Method: Cast Blocks
- Lift Type: Lift Kit
- Wheel Size: 17 x 9
- Back Spacing: 5"
- Max Tire Size: 35 x 12.5
- Wheel Size 2: 18 x 9
- Back Spacing 2: 5"
- Max Tire Size 2: 35 x 12.5
- Wheel Size 3: 20 x 9
- Back Spacing 3: 5"
- Max Tire Size 3: 35 x 12.5
- Is Adjustable: No
- Finish: Powdercoat
- Cutting Required: No
- Accommodates Factory Wheels: See Notes
- Welding Required: No
- This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
- Gas Engine? Gas models may sit slightly taller than the advertised lift height due to lighter weight of engine
- Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration
- All Necessary Mounting / Installation Hardware
- Bump Stop Extensions
- Coil Springs
- Control Arms
- Dropped Pitman Arm
- Rear Lift Block & U-Bolt Kit
- Sway Bar Relocation Brackets
- Track Bar Relocation Bracket
- Front and Rear Nitro Series Shocks
| Property | Values |
|---|---|
| Year Ranges | 2010 |
| Make | RAM |
| Model | |
| Series | 2500 |
| Engine | 6.7L Cummins |
Recommended for You
- Choosing a selection results in a full page refresh.
!