7-9 inch Front Sway Bar End Link Kit

Features:

• Lower clevis system which takes some of the angle off of the link when the suspension is cycling minimizing stress that can cause breakage
• Polyurethane bushings
• Made in the USA
• Lift Height: 7-9"

Front Sway Bar End Link Kit Allows for Clearance of Larger Diameter Tie Rods

Upgrading to larger diameter performance tie rods is not as easy as just slapping them on your 2001-2019 GM 6.6L Duramax 2500HD / 3500HD build. You are going to need the 2001-2019 GM 6.6L Duramax 2500HD / 3500HD Cognito Front Sway Bar End Link Kit, which includes front sway bar end links that are a little longer than the recommended factory length to allow for proper clearance of your new tie rods. Your factory links would surely break if you tried to install your larger diameter tie rods with your OE-style links. These links utilize a lower clevis system to take some of the angle off of the link when your suspension is being cycled. Taking this angle off relieves pressure which will likely lead to a broken sway bar end link. Make sure to check you current sway bar end link length that you currently have to make sure it matches up to the specs of this upgrade.

Fitment: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 GM Silverado/Sierra 2500/3500 2WD/4WD  1999-2006 Silverado/Sierra 1500 4WD

Important Note: Mounting surface to mounting surface measurement for this kit is 14" (Measured from top of lower control arm up to the bottom of sway bar).