Carrier Bearing Drop 4.5" Inch Lift

Features:

• Fits 2005–2024 Ford F250 and F350 trucks
• Required for 4.5" inch lift applications
• Designed for trucks with two-piece driveshafts
• Helps correct driveline angles
• Reduces vibration under acceleration
• Includes four 1/4 inch thick shims
• Allows tuning for proper pinion alignment
• Includes all necessary installation hardware
• Durable construction for long-term reliability
• Simple bolt-on installation process

Say Goodbye To Driveline Vibes And Enjoy A Smoother Ride

When you lift your truck, you're unlocking more ground clearance and better off-road performance, but you may also run into some unwanted side effects. If you’ve got a 2005–2024 Ford F250 or F350 with a 4.5" inch lift and a two-piece driveshaft, chances are you’ve felt the annoying vibration that can come with poor driveline alignment. That’s where the Carli Carrier Bearing Drop Kit comes in. This simple but effective upgrade helps you dial in the perfect angle on your driveline, restoring smoothness and protecting your components over time. Whether you're cruising down the freeway or crawling over rocky trails, the improvement in feel is immediate. No cutting or guesswork here, the kit includes four precision 1/4 inch shims so you can fine-tune the setup to match your truck’s exact needs. With new hardware included and a bolt-on install, you’ll be back on the road quickly and riding better than ever.

A Practical Fix For Lifted Trucks With Two Piece Shafts

The Carli CS-CARRIERDROP-F Carrier Bearing Drop Kit is designed to correct driveline geometry issues that often occur after installing a suspension lift. Specifically built for 2005–2024 Ford Super Duty trucks with 4.5" inch lifts and factory two-piece driveshafts, this kit helps eliminate driveline vibration by realigning the carrier bearing angle. Included in the kit are four 1/4 inch thick shims that allow for precise vertical adjustment, giving you the flexibility to tune your driveshaft angles to match your specific lift and suspension configuration. All necessary hardware is supplied, ensuring a secure and clean installation without the need for fabrication or modification. By optimizing the carrier bearing height, the kit reduces stress on the driveshaft and U-joints, promoting longer component life and a smoother driving experience. This is especially important for trucks that tow, haul, or see regular off-road use. It’s a small part with a big impact, and a critical finishing touch for any properly set up lifted Super Duty.

Fits:  2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Ford F250/F350 Super Duty 4WD w/ 2-Piece Driveshaft

Notes:

• Specifically designed for 2005–2024 Ford F250/F350 Super Duty models.
• Required for vehicles with a 4.5" inch suspension lift and a two-piece driveshaft.
• Helps eliminate driveline vibration caused by altered driveshaft angles.
• Includes four 1/4 inch shims for fine-tuning carrier bearing height.
• Allows for customizable driveline angle adjustments based on your truck’s setup.
• All mounting hardware is included for a complete installation.
• No cutting, drilling, or permanent modifications required.
• Ideal for improving ride quality and protecting driveline components.
• Recommended for use with Carli Suspension lift systems.