6 inch Long Arm Lift Kit with FOX 2.0 Shocks & Rear Block Kit

6" Lift Kit Features:

• Tubular long arms to create more controlled feeling on and off road
• Maintains proper suspension geometry
• Progressive rate coils springs for a great ride on any terrain
• Front track bar relocation bracket to re-position axle
• NX2 Nitro gas shocks to improve ride performance

Fox 2.0 Shocks Features:

• 2" impact extruded aluminum body
• IFP monotube design
• 6061-T6 aluminum mounting ends
• 5/8" hard chrome plated heat-treated alloy steel shaft
• Race-developed high-flow piston design
• Long lasting clear anodized finish

Rear Lift Block Kit Features:

• Blocks are made from cast iron for strength
• Tapered for correct pinion angle
• Steel pin and hole are offset to restore axle position

Improve Performance For On And Off-Road Terrain

Improve your rigs performance when upgrading to the BDS 6 inch lift kit. Power through the off-road uneven paths with this loaded component 6 inch lift kit to make more out of your off-road adventures. With the pro-ride coil springs that come in this high-quality kit you'll be able to not only improve ride-comfort but also prevent sagging, and increase load carrying capacity for any towing. Travel on or off-road with this high-quality kit and replace your old worn down stock models.

Maintain Control And Trek Through The Uneven Dirt Path

Make your 2008 Dodge Ram 2500/3500 truck outperform other stock models with the upgraded quality components with this 6 inch lift kit from BDS Suspension. Travel over on or off-road terrain and maintain great drive quality, and improve your rigs stance, performance, and capabilities. With a lifted height up to 6 inches, you'll be able to install 37 inch tires to your truck that makes off-road terrain easier to trek through. Maintain your control and steering with this aftermarket lift kit.

Kit Components:

• 1x - 03-up Dodge 3/4 ton 4" Rear (012405)
• 1x - 08 Ram 6" Long Arm Box Kit (012602)
• 1x - Dodge Control Arm Mounts (012801)
• 1x - Dodge Control Arm Box Kit (012802)
• 1x - 03-12 Dodge Ram 2500 Gas 6" Coil Kit (032601)
• 2x - Fox 2.0 Shock 28.25 x 17.15 x 2 - S50 / EB1 (FOX98224750)
• 2x - Fox 2.0 Shock 33.85 x 20.75 x 2 - EB1 / EB1 (FOX98224761)

Tire and Wheel recommendations: 37 x 12.5 with 17 x 9 and 5 inch Backspace

Note: Measure rear axle tube before ordering. Some 4" axle models with dual overloads will require u-bolt 4068.

Note: Power Wagon applications require sway bar link #122401. With a 2" taller ride height, will make net gain 4".

Note: If driveline vibration occurs, order transfer case index kit #122801 or #122802.

Note: If your truck has had the steering gear box changed and the sector shaft diameter measures 1 1/2" to 1 5/8" you will need to add part #BDS082404 to your kit.

Specs:

• Front Lift: Coil Spring
• Rear Lift: Block
• Shocks: Yes
• Front Lift Height: 6"
• Rear Lift Height: 4"

Fitment: 2008 Dodge Ram 2500/3500 4WD Gas