BDS 2242H 5 Inch Lift Kit w/ Radius Arm, NX2 Nitro Series Shocks & 5 Inch Block Kit w/o Overload | 2023-2025 Ford F250/F350 Super Duty 4WD Diesel

Features:

• 5-inch lift for aggressive stance
• Clears up to 37-inch tires
• Diesel-specific Pro-Ride coil springs
• NX2 Nitro shocks for smooth control
• Heavy-duty tubular radius arms
• Radius arms allow caster correction
• Track bar bracket improves steering response
• Forged drop pitman arm included
• Fabricated 5-inch rear lift blocks
• 100% bolt-on installation process
• OE-style rubber bushings for quiet ride
• Designed specifically for diesel models

Take Your Super Duty From Stock To Standout

If your 2023-2025 Ford F250 or F350 Super Duty diesel is ready for a new look and a better ride, this 5-inch lift kit from BDS Suspension delivers everything you need in one solid package. It’s not just about the height, this kit completely transforms how your truck sits, feels, and handles both on and off the road. You’ll have clearance for up to 37-inch tires, giving your truck the aggressive stance it deserves. But it doesn’t stop there. The ride quality improves too, thanks to diesel-specific Pro-Ride coil springs and NX2 Nitro shocks that are tuned for everyday drivability and weekend adventures. Whether you're hauling heavy gear, trailering a camper, or just want to cruise in comfort, this system is built to handle it all with confidence. And with a 100% bolt-on design, it goes on easily without cutting up your factory setup.

Built For Daily Drivers Who Demand More

This BDS 2242H 5-inch radius arm lift kit is designed with durability, performance, and precision in mind. Up front, you get full-length Pro-Ride coil springs built specifically for diesel trucks, offering consistent height and smooth travel over changing terrain. The factory radius arms are replaced with heavy-duty tubular steel versions that include built-in caster correction, keeping your alignment in check and your handling tight. Steering geometry is fully addressed through a forged drop pitman arm and a track bar relocation bracket, keeping everything dialed in as suspension cycles. Out back, the 5-inch fabricated lift blocks help maintain a level stance from front to rear and are paired with extended u-bolts and brake line brackets to complete the setup. The included NX2 Nitro shocks use vehicle-specific valving, offering improved ride control without compromising on-road comfort. Every component works together to give your Super Duty better ground clearance, control, and confidence no matter where the road or trail leads.

Fits: 2023, 2024, 2025 Ford F250/F350 Super Duty 4WD Diesel

Notes:

• Vehicles with radius arm mounted ride height sensors will require BDS123303
• Ford recommends replacing the pitman arm nut after each removal
• Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper
• Trucks with a 2-piece rear driveshaft may need Carrier Bearing Drop Kit BDS123402
• Tremor models will not achieve full advertised lift height due to taller factory stance
• Stock wheels with larger tires may cause interference with brake lines, radius arms, and sway bars
• Minor trimming may be required for 37x12.50 tires depending on wheel setup
• Installation requires a torque wrench capable of 406 ft-lbs
• Vehicles with leaf spring ride height sensors must choose the correct rear block option
• Kit is designed for SRW (Single Rear Wheel) models only
• ADAS systems may require recalibration after installation by a dealership or ADAS service center
• All ADAS recalibration costs are the responsibility of the vehicle owner

Install Instructions