BDS 2214FPE 5 Inch Lift Kit w/ 4-Link, FOX 2.5 Performance Elite shocks & Leaf Springs | 2020-2022 Ford F250/F350 Super Duty 4WD Gas

Features:

• 5" lift clears up to 37" tires
• Gas-specific Pro-Ride coil springs included
• Multi-leaf rear springs for smoother control
• Heavy-duty 4-link arms improve suspension geometry
• Bolt-on installation requires no cutting or welding
• FOX 2.5 shocks with external reservoirs available
• Dual Speed Compression adjusters for shock tuning
• Nitrogen-charged NX2 shocks provide steady damping
• Forged pitman arm corrects steering geometry
• Cast steel brackets ensure long-term durability
• Maintains factory payload and ride comfort
• Designed for confident on-road and off-road handling

Give Your Super Duty The Lift It Deserves

If you're looking to take your gas-powered Super Duty from factory to fierce, the BDS 2214FPE 5 Inch Lift Kit with 4-Link is the upgrade that makes it happen. It’s built for truck owners who want more than just height, they want presence, capability, and real performance. With clearance for up to 37-inch tires, this lift gives your truck the stance to back up its power, whether you’re towing, hitting trails, or just turning heads around town. The ride stays smooth and confident thanks to gas-specific Pro-Ride coil springs that absorb rough terrain while maintaining on-road comfort. The included 4-link conversion gives you tighter handling and better control, especially when carrying heavy loads or driving on uneven roads. Rear leaf springs eliminate the need for lift blocks and help reduce axle wrap, creating a more predictable and controlled driving experience. And because this system is 100% bolt-on, you get all the benefits of a serious suspension upgrade without the hassle of cutting or welding.

Purpose Built Suspension Tuning For Daily Work And Weekend Play

This lift kit is designed from the ground up to enhance the suspension geometry and ride quality of your 2020-2022 Ford F250 or F350 4WD gas truck. It starts with a set of full-length, dual rate Pro-Ride coil springs tuned specifically for gas engines, giving your truck the correct lift height and a predictable ride across changing terrain. The factory stamped steel radius arms are replaced by a heavy-duty 4-link setup using ¼-inch steel brackets, which help maintain axle alignment and minimize caster change throughout wheel travel. Up front, a forged drop pitman arm and track bar relocation bracket work together to correct steering angles and recenter the front axle. In the rear, this kit includes multi-leaf progressive rate springs that offer increased stability without compromising payload capacity. These leaf springs also eliminate the need for a lift block, which helps prevent axle wrap and supports a more controlled suspension movement. Whether you're putting in work or heading out for adventure, this suspension setup keeps your truck dialed in and ready to handle both.

Fits: 2020, 2021, 2022 Ford F250/F350 Super Duty 4WD Gas

Notes:

• Ford recommends replacing the pitman arm nut after each removal
• Trucks with top-mounted overload springs may require UBT4027 spacers taller than 1-1/8"
• Front exhaust modification may be required on gas models
• Use a small pitman arm puller for drag link and stabilizer removal
• Carrier Bearing Drop Kit (BDS123402) may be required for 2-piece driveshafts
• Tremor models will not achieve full advertised lift height
• Larger tires on stock wheels are not recommended due to brake line clearance
• Minor trimming may be needed for 37x12.50 tires on certain setups
• Installation requires a torque wrench rated to 405 ft-lbs
• Check for Ford Safety Recall 21S31 if rear driveline vibration occurs
• BDS recommends completing recall work before lift installation
• Fits Single Rear Wheel (SRW) models only

Install Instructions