BDS 1543H 2.5 inch Radius Arm Lift Kit with NX2 Nitro Shocks | 2017-2022 Ford F250/F350 Super Duty 4WD

Features:

• 2.5" front lift levels factory rake
• Includes dual-rate ProRide coil springs
• Heavy-duty BDS tubular radius arms
• High-strength track bar relocation bracket
• NX2 Nitro shocks included front and rear
• Compatible with 35x12.5" tires
• Fits 17x9 to 20x9 wheels with 4.5" backspacing
• Maintains proper alignment and steering geometry
• Rear lift via replacement steel blocks and U-bolts
• Optional upgrade to FOX 2.0 or 2.5 shocks
• Backed by Factory Protection Plus Warranty
• ESC system compatible for peace of mind

Give Your Super Duty A Tougher Look And Better Ride

If you’re ready to clean up that factory rake and give your Super Duty the stance it was always meant to have, the BDS 1543H 2.5" Radius Arm Lift Kit is the perfect way to get there. This setup gives your F250 or F350 just enough front lift to level things out, while clearing 35-inch tires for a bold, capable appearance. But it’s more than just good looks. With BDS's heavy-duty radius arms and ProRide dual-rate coil springs, you’ll also gain a smoother, more controlled ride both on and off the pavement. Whether you’re towing, commuting, or heading off the grid, the included NX2 Nitro shocks help absorb the bumps without sacrificing comfort. This kit is a great middle ground for daily drivers who still demand real performance when the work begins. And with BDS’s no-nonsense warranty and Factory Protection Plus program behind it, you’re covered no matter where the road takes you.

Strength Ride Quality And Geometry Built Into One System

The BDS 1543H Radius Arm Lift Kit is engineered for 2017–2022 Ford F250 and F350 Super Duty 4WD diesel trucks and built to deliver precise handling and rugged durability. At the heart of the kit are high-strength, tubular radius arms that replace the weak factory components while repositioning the axle to correct caster and improve alignment at the new ride height. The 2.5-inch lift comes from BDS’s own ProRide dual-rate coil springs, which deliver a smooth ride on the road and added stability when loaded or off-road. A heavy-duty track bar relocation bracket keeps the front axle properly centered, and replacement rear lift blocks with longer U-bolts ensure a level stance without compromising drivability. NX2 Nitro shocks are included for all four corners, providing balanced damping tuned for both comfort and performance. With support for 35x12.5 tires and multiple wheel options, this kit gives you room to upgrade without headaches. It installs in about 5 hours, is fully ESC compatible, and carries a 5-year/60,000-mile drivetrain warranty in addition to BDS’s lifetime coverage.

Fits: 2017, 2018, 2019, 2020, 2021, 2022 Ford F250/F350 Super Duty 4WD

Notes:

• Fits 2017–2022 Ford F250/F350 Super Duty 4WD diesel models
• Coil springs are diesel-specific; gas models may sit higher
• Compatible with up to 35x12.5" tires on proper wheels
• Trimming may be required depending on wheel and tire setup
• Not recommended for use with factory wheels & oversized tires due to brake line clearance
• Radius arms are repositioned to correct caster and alignment
• Factory track bar bolt requires 405 ft-lbs of torque
• Includes rear lift blocks and longer U-bolts for level stance
• ESC system compatible for 100% OE integration
• Backed by BDS No Fine Print Lifetime Warranty
• Includes Factory Protection Plus with drivetrain coverage
• Estimated installation time is 5 hours with moderate difficulty