2", 2-5/16" Dual Ball Pintle Tow & Stow

Features:

• Dual ball, 2-inch and 2-5/16-inch balls
• Built-in pintle hook
• 16,000 lb gross trailer weight capacity
• 1,600 lb vertical tongue weight capacity
• 6-inch drop and 4-inch rise
• Height adjustable in 1-inch increments
• Quick ball change by removing one pin
• Stows under the vehicle when not in use
• Fits any standard 2-inch receiver
• High-strength American steel with stainless steel pins
• UV-resistant black powder coat finish
• Made in the USA with limited lifetime warranty

One Hitch For Every Trailer You Own That Disappears Under The Truck When You Are Done

Anyone who tows more than one trailer knows the routine of swapping balls, changing mounts, and wondering where you left the right one. The B&W Tow and Stow Dual Ball Pintle puts the answer in one hitch. It carries both a 2 inch and a 2 5/16 inch ball, so you can switch between trailers by removing a single pin. A built in pintle hook lets you hook up heavier gear, and B&W rates the 2 5/16 inch setup at 16,000 pounds of gross trailer weight. Height adjusts in 1 inch steps, so you can level a trailer that sits higher or lower than your truck without hunting for a different ball mount. When the trailer is unhooked, the whole hitch stows under your vehicle, which keeps it out of the way and helps prevent accidental bumps in the garage. B&W builds it in the USA from high strength American steel, with stainless steel pins and a UV resistant black powder coat. A limited lifetime warranty backs the hitch, which makes it a solid choice for a truck that tows a little bit of everything.

Drop, Rise, And Ball Ratings Laid Out So You Can Match The Hitch To The Trailer

The B&W TS10053B is a 2 inch shank Tow and Stow dual ball pintle hitch that fits any standard 2 inch receiver. It has a 6 inch drop and a 4 inch rise, with height adjustments in 1 inch increments. The dual balls are 2 inch and 2 5/16 inch, and you change the ball size by removing one pin. The 2 5/16 inch ball is rated for 16,000 pounds of gross trailer weight and 1,600 pounds of vertical tongue weight, and B&W rates the 2 inch ball for 10,000 pounds and 1,000 pounds. B&W designs the pintle function for use only with the 2 5/16 inch ball. The hitch is made from high strength American steel with stainless steel pins that resist rust, and the UV resistant black powder coat keeps it looking good. When you are done towing, it stows under the vehicle. B&W notes that the pintle Tow and Stow models will not clear MultiPro and MultiFlex tailgates.

Fitment: Universal, fits any standard 2" receiver, 2" shank

Notes:

• Pintle Tow and Stow models will not clear MultiPro or MultiFlex tailgates, confirm your tailgate before ordering
• 2" shank, fits any standard 2" receiver
• 6" drop and 4" rise, measure your coupler height to confirm the hitch can reach it
• Dual ball (2" and 2-5/16"), change balls by removing one pin
• Ratings: 16,000 lb gross trailer weight and 1,600 lb vertical tongue weight with the 2-5/16" ball, 10,000 lb and 1,000 lb with the 2" ball, the pintle function is for use with the 2-5/16" ball only
• Always confirm your vehicle's towing capacity, the hitch rating is not the vehicle rating
• Retailer listings recommend at least 11" of clearance between the ground and the lowest point of the hitch to avoid steep driveways and curbs
• Black powder coat finish with stainless steel pins, made in the USA
• Covered by B&W's limited lifetime warranty
• California Proposition 65 warning applies to this product

Install Instructions