AXGMEL79 Sway Bar End Link Kit - for 7-9" Lift - (Pair)

Features:

• Built for trucks with 7-9" lift kits
• Heavy-duty replacement for weak factory end links
• 14.25" center-to-center, 8.25" longer than stock
• Integrated clevis reduces suspension-angle stress
• Addresses a known GM factory failure point
• Recommended when running oversized tie rods
• Maintains OEM-like fit and ride quality
• Requires factory sway bar location, over tie rod
• Sold as a complete pair
• Backed by Axiom's lifetime warranty

Stop Replacing The Same Weak Link Over And Over

If you've pushed your GM HD truck into serious lift territory, 7 to 9 inches of lift, you already know factory sway bar end links were never built to handle that kind of suspension angle. At that height, the angular stress on a stock-style link multiplies fast, and it's usually just a matter of time before one snaps at the worst possible moment. The Axiom Supply AXGMEL79 is built specifically to solve that problem, with a heavy-duty design and an integrated clevis that reduces the angular load these links deal with throughout the full range of suspension travel. At 14.25 inches center to center, these links run about 8.25 inches longer than stock, which is exactly the length needed when a lift kit drops the lower control arms roughly 7 inches from their factory mounting position. These are also a smart addition if you're running oversized tie rods, since the added length and clevis design provide the clearance needed for that upgrade to work correctly. Whether your heavily lifted truck is a weekend trail rig or a serious daily driver, this is the kind of upgrade that quietly prevents a roadside headache down the line. Once these are installed, that factory weak point stops being something you have to think about.

Engineered Clevis Design Built To Handle Real Suspension Loads

The Axiom Supply AXGMEL79 is a heavy-duty sway bar end link kit engineered specifically for GM Silverado and Sierra 2500HD and 3500HD trucks running a 7 to 9 inch lift kit that keeps the front sway bar in its factory location, positioned over the top of the tie rod. Each link measures 14.25 inches center to center, approximately 8.25 inches longer than the factory link, which is the correct length for lift kits that drop the lower control arms roughly 7 inches from their stock mounting point. The standout feature of this design is the integrated lower clevis, which reduces the angular load placed on the link as the suspension cycles through its full range of travel at this extreme ride height. Factory-style end links rely on a straight ball joint connection that becomes increasingly stressed as suspension angle grows, and that added stress is the primary reason factory links fail on heavily lifted trucks. The clevis design in this kit directly addresses that weak point while still maintaining an OEM-like fit and ride quality, so handling stays predictable even at this taller stance. This kit is also strongly recommended for trucks running oversized tie rods, since the added length and clearance are necessary for that upgrade to function properly. Every AXGMEL79 kit is backed by Axiom Supply's lifetime warranty against manufacturer defects, premature wear, or breakage.

Fitment: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 Chevrolet Silverado 2500HD/3500HD, GMC Sierra 2500HD/3500HD, with 7-9" lift kit and factory sway bar location

Notes:

• Only fits trucks with a 7-9" lift kit
• Requires sway bar to remain in factory location, over the tie rod
• Measures 14.25" center-to-center, approximately 8.25" longer than stock
• Strongly recommended when running oversized tie rods
• Sold as a complete pair
• Addresses a common factory sway bar end link failure point
• Covered by Axiom's lifetime warranty to original purchaser

Install Instructions