AXGMEL02 Sway Bar End Link Kit - for 0-2" Lift - (Pair)

Features:

• Heavy-duty replacement for weak factory end links
• 7" center-to-center, 1" longer than stock
• Built for stock height to 2" lift
• Integrated clevis reduces suspension-angle stress
• Addresses a known GM factory failure point
• Recommended when running oversized tie rods
• Maintains OEM-like fit and ride quality
• Sold as a complete pair
• Built with long-lasting, durable materials
• Backed by Axiom's lifetime warranty

Stop Replacing The Same Weak Link Over And Over

If you've owned a GM HD truck long enough, there's a good chance you've already dealt with a broken sway bar end link, and if you haven't yet, it's probably just a matter of time. The factory links on these trucks are a known weak point, and once suspension angle increases even slightly, whether from a leveling kit or just years of wear, they tend to fail right when you need them most. The Axiom Supply AXGMEL02 is built to put that problem behind you for good, with a heavy-duty design and an integrated clevis that reduces the angular stress these links deal with throughout suspension travel. Measuring about an inch longer than stock at 7 inches center to center, these links are specifically optimized for trucks sitting anywhere from stock height up to a 2 inch leveled stance. They're also a smart addition if you're upgrading to oversized tie rods, since the added clearance helps everything work together without binding. Whether your truck is a daily driver, a dedicated tow rig, or sees regular off-road use, this is the kind of upgrade that quietly prevents a roadside headache down the line. Once these are on, that factory weak point stops being something you have to think about.

Engineered Clevis Design Built To Handle Real Suspension Loads

The Axiom Supply AXGMEL02 is a heavy-duty sway bar end link kit engineered specifically for GM Silverado and Sierra 2500HD and 3500HD trucks sitting at stock ride height or with up to a 2 inch front leveling kit installed. Each link measures 7 inches center to center, roughly an inch longer than the factory link, which is the correct length for maintaining proper sway bar geometry across this specific ride height range. The standout feature of this design is the integrated lower clevis, which reduces the angular load placed on the link as the suspension cycles through its full range of travel. Factory-style end links rely on a straight ball joint connection that becomes increasingly stressed as suspension angle changes, and that added stress is a major contributor to the premature failures these trucks are known for. The clevis design in this kit directly addresses that weak point while still maintaining an OEM-like fit and ride quality, so there's no compromise in how the truck drives day to day. This kit is also strongly recommended for trucks running oversized tie rods, since the added length and clevis design provide the clearance needed for that upgrade to function properly. The kit includes two complete end links, enough to replace both sides in a single purchase, and every AXGMEL02 is backed by Axiom Supply's lifetime warranty against manufacturer defects, premature wear, or breakage.

Fitment: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 Chevrolet Silverado 2500HD/3500HD, GMC Sierra 2500HD/3500HD, stock height up to 2" leveled stance

Notes:

• Only fits trucks from stock height up to a 2" leveled stance
• Not designed for taller lift applications
• Measures 7" center-to-center, approximately 1" longer than stock
• Strongly recommended when running oversized tie rods
• Sold as a complete pair, replaces both sides
• Addresses a common factory sway bar end link failure point
• Covered by Axiom's lifetime warranty to original purchaser

Install Instructions