AXFDSWD1 Front Sway Bar Drop Kit

Features:

• Corrects sway bar geometry after leveling
• Lowers sway bar by 2 inches
• Moves sway bar 1.25 inches forward
• Helps reduce sway bar binding
• Maintains proper sway bar alignment
• Works with stock length end links
• Precision steel construction
• Grade 10.9 mounting hardware
• Powder coated for corrosion resistance
• Direct bolt on installation
• No cutting or modifications required
• Backed by Axiom's lifetime warranty

Keep Your Sway Bar Working With Your Lift

A leveled Super Duty should feel controlled and predictable, but changing the front ride height can leave the factory sway bar sitting at an angle it was never meant to operate at. The Axiom Supply AXFDSWD1 Front Sway Bar Drop Kit helps correct that problem on 2008-2026 Ford F250 and F350 Super Duty 4WD trucks equipped with a leveling kit and stock length sway bar end links. By repositioning the sway bar, this kit helps reduce binding and keeps its movement better aligned with the rest of the front suspension. That correction can make a noticeable difference when the suspension is working through turns, rough roads, jobsite terrain, or changing loads. It can also help address clearance concerns that may appear when other suspension or steering components are added to the truck. You get a straightforward solution that helps the factory sway bar continue doing its job without requiring cutting or permanent modifications. For a leveled Super Duty that needs its suspension geometry cleaned up, this kit takes care of an important detail that can easily be overlooked.

Reposition Sway Bar Geometry Where It Belongs

The AXFDSWD1 relocates the factory front sway bar 2 inches lower and 1.25 inches forward to improve its operating position after suspension changes. This revised mounting location is designed to help align stock length sway bar end links and reduce the excessive angles that can contribute to binding or unwanted component stress. Each bracket uses precision steel construction for the strength and consistent fit required at the sway bar mounting points. A matte black powder coated finish provides corrosion resistance for components that regularly encounter water, dirt, and road debris beneath the truck. Grade 10.9 hardware is included to provide a strong and secure mounting connection for the relocation brackets. The complete kit contains one left bracket, one right bracket, and four hardware sets, with the four mounting bolts specified at 37 pound feet of torque. Since this kit is intended for leveled applications or situations where sway bar end link alignment needs correction, confirming your existing suspension and end link configuration before installation will help ensure the proper setup.

Fitment: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026 Ford F250/F350 Super Duty 4WD

Notes:

• Fits 2008-2026 Ford F250/F350 Super Duty 4WD models.
• Intended for leveled trucks using stock length sway bar links.
• Can also help correct sway bar end link alignment.
• Relocates the sway bar 2 inches lower.
• Moves the sway bar 1.25 inches forward.
• Confirm current suspension geometry before ordering.
• Kit includes one left and one right bracket.
• Four hardware sets are included.
• Mounting bolts require 37 lb-ft of torque.
• No cutting or permanent modification is required.
• Warranty coverage applies to the original purchaser.