Front Radius Arm Drop Kit - for 4.5-7" Lift - (Pair)

Features:

• Supports ICON 4.5 to 7 inch lifts
• Fits 2017-2022 Ford F250/F350 Super Duty 4WD
• Reduces lifted radius arm angles
• Aids proper caster correction
• Fits stock or aftermarket radius arms
• Heavy duty steel plate construction
• CNC laser cut for precise fitment
• Brake formed for added rigidity
• Built for aggressive off road use
• 100 percent bolt on installation
• No cutting or welding required
• Corrosion resistant powder coat finish
• Backed by ICON Limited Lifetime Warranty

Get Your Lifted Super Duty Back In Line

Once you move a Super Duty up several inches, keeping the factory suspension geometry in mind becomes just as important as choosing the lift itself. The ICON 64055 Front Radius Arm Drop Kit helps 2017-2022 Ford F250 and F350 Super Duty 4WD trucks accommodate ICON suspension systems with 4.5 to 7 inches of lift. Relocating the radius arm mounting points reduces the arm angle created by the added ride height and assists with caster correction. That makes this kit an important piece of a properly configured lifted suspension, especially when you want the truck to feel composed beyond the pavement. You are not locked into one radius arm setup either, since these brackets work with both factory and aftermarket radius arms. Installation stays manageable thanks to a completely bolt on design that requires no cutting or welding to the truck. With rugged steel construction and a corrosion resistant finish, these brackets are ready to support a Super Duty built for workdays, weekends, and plenty of dirt in between.

Relocated Mounting Points Support Proper Suspension Geometry

The ICON 64055 Front Radius Arm Drop Kit is engineered specifically around the suspension geometry of 2017-2022 Ford F250 and F350 Super Duty 4WD models. Its primary job is to relocate the radius arm mounting points for trucks equipped with ICON 4.5 to 7 inch lift suspension systems. Lowering those mounting locations reduces the radius arm angle created by the increased ride height while also aiding in caster correction. Each bracket is fabricated from CNC laser cut steel plate and brake formed to create a strong structure capable of handling demanding suspension loads. ICON engineered the brackets for the stresses of aggressive off road use, making durability an important part of the design rather than an afterthought. A semi gloss black powder coat finish adds corrosion resistance and helps protect the steel from regular exposure beneath the truck. The brackets install using a fully bolt on configuration with no cutting or welding required, and ICON covers the fabricated components with its Limited Lifetime Warranty.

Fitment:  2017, 2018, 2019, 2020, 2021, 2022 Ford F250/F350 Super Duty 4WD w/ 4.5-7" Front Lift

Notes:

• Fits 2017-2022 Ford F250/F350 Super Duty 4WD models.
• Designed for ICON 4.5" to 7" lift systems.
• Compatible with factory radius arms.
• Compatible with aftermarket radius arms.
• Intended to correct radius arm positioning after lifting.
• Aids caster correction on lifted applications.
• Verify lift height before ordering.
• No cutting or welding is required.
• Kit includes a pair of drop brackets.
• California residents should review Proposition 65 warnings.
• (2) ICON Front Radius Arms.
• Product images may be representative.

Install Instructions