Front Adjustable Track Bar Kit - for 3-8" Lift - (Single)

Features:

• Supports 3-8" lift suspensions
• Fits 1999-2004 Ford F250/F350 Super Duty
• Adjustable directly on the vehicle
• Helps recenter the front axle
• Restores proper steering geometry
• Helps minimize uneven tire wear
• Billet aluminum track bar construction
• FK rod ends reduce deflection
• Improves front suspension alignment
• Uses factory mounting hardware
• Vehicle specific bolt on fitment

Bring Your Front Axle Back Where It Belongs

A tall lift can completely change the attitude of your Super Duty, but it can also shift the front axle away from its ideal position. The ICON 39290 Front Adjustable Track Bar Kit gives 1999-2004 Ford F-250 and F-350 Super Duty owners a straightforward way to correct that issue on trucks with 3 to 8 inches of lift. Instead of settling for an off center front end, you can adjust the track bar directly on the truck to bring the axle back into proper alignment. Getting that position dialed in helps restore steering geometry and can reduce uneven tire wear, which becomes especially important when you are running larger and more expensive tires. ICON builds the bar from billet aluminum for a combination of strength and precise construction suited to demanding suspension setups. Rugged FK rod end bearings further improve the connection by minimizing deflection when suspension and steering loads increase. If your lifted Super Duty needs more precise front axle positioning, this adjustable track bar gives you the control to get the setup properly sorted.

Precision Adjustment For Proper Suspension Geometry

The ICON 39290 is engineered to address the lateral axle movement created when a 1999-2004 Super Duty is raised beyond its factory ride height. Its adjustable design supports trucks with 3 to 8 inches of lift and allows changes to be made while the bar remains installed on the vehicle. This makes it easier to fine tune axle position during alignment without repeatedly removing suspension components. The billet aluminum construction provides a rigid foundation, while FK rod end bearings help eliminate unwanted deflection under load. Maintaining the correct axle position also supports proper steering geometry, which contributes to more predictable steering behavior and better tire contact. ICON designed the track bar to mount using the factory hardware, keeping installation focused around the original mounting locations. Together, these details make the 39290 a purpose built geometry correction component for lifted Super Duty front suspensions.

Fitment: 1999, 2000, 2001, 2002, 2003, 2004 Ford F250/F350 Super Duty w/ 3-8" Lift

Notes:

• Fits 1999-2004 Ford Super Duty pickup applications.
• Designed for trucks with 3 to 8 inches of lift.
• Intended to correct an off center front axle.
• Adjustment can be performed while installed.
• Uses the factory track bar mounting hardware.
• Proper adjustment is important for steering geometry.
• Alignment should be checked after installation.
• This kit includes one adjustable front track bar.
• Verify current lift height before ordering.
• California residents should review the Prop 65 warning.
• Product images may be representative.

Install Instructions