BDS 1910H 2 inch Coil Spring Lift Kit | 2017-2025 Ford F250/F350 Super Duty 4WD

Features:

• Dual rate ProRide coil springs included
• NX2 gas shocks at all four corners
• Levels front with factory rear height
• Improves ride quality on and off-road
• Maintains axle alignment with bracket included
• Allows up to 35x12.5" tire fitment
• Fits 17x9, 18x9, or 20x9 wheels
• Durable high-strength track bar bracket
• Designed for diesel and gas models
• Improved stability in rough terrain
• 4-hour installation with basic tools
• Made for 2017–2025 Super Duty 4WD

Turn Your Super Duty Into A Road Ready Beast

If your Super Duty still sits nose-down like it just rolled off the lot, the BDS 1910H 2-inch Coil Spring Lift Kit is the upgrade that brings attitude, clearance, and comfort together in one shot. This isn’t some cookie-cutter spacer kit you’ll regret after a few months, this is a performance-minded solution with real off-road capability and everyday drivability in mind. With dual rate ProRide coil springs, your truck gains a softer ride around town and the stability you need when the trail gets rough. Add in a full set of NX2 gas shocks at all four corners and you’ve got improved control whether you’re towing down the highway or crawling over ruts. It’s designed to support up to 35-inch tires on 9-inch wide wheels, giving your build the aggressive stance you’ve been thinking about. Best part is, it levels your truck cleanly without throwing off the geometry or ride feel. If you want your F250 or F350 to perform as good as it looks, this kit delivers the goods.

Built With The Right Parts To Do The Job Right

BDS designed the 1910H kit for 2017-2025 Ford F250 and F350 4WD models with a focus on long-term durability and proper suspension geometry. At the center of this system are dual rate ProRide coils that provide different levels of stiffness depending on the terrain. The initial spring rate is softer for a smoother ride, while the secondary rate kicks in when conditions demand more control. Unlike basic spacer kits, this lift comes with a high-strength track bar relocation bracket that keeps your axle properly centered after the front is raised. This prevents the coil springs from rubbing or misaligning and ensures better overall suspension performance. NX2 twin-tube gas shocks are included for all four corners and are tuned to complement the springs' performance under both highway and trail conditions. The system allows for 35x12.50 tires with the right wheel specs and may require trimming depending on setup. For gas models, expect about a half inch more ride height compared to diesel, and installation clocks in at an easy 4-hour job for someone with basic tools and garage space.

Fits: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025 Ford F250/F350 Super Duty 4WD

Notes:

• Fits 2017–2025 Ford F250/F350 Super Duty 4WD models
• Designed for diesel models but fits gas trucks too
• Gas trucks will sit approximately 0.5" higher
• 2017–2019 trucks only net 1" lift without extra spacer
• Additional 1" coil spacer required for true 2" on 2017–2019
• Allows 35x12.50 tires with correct wheels and backspacing
• Trimming may be necessary depending on tire and wheel combo
• Track bar relocation bracket helps maintain correct geometry
• Ride height sensor bracket required on 2023+ trucks with sensors
• Selectable hub locks may be needed for 2024+ non-selectable hubs
• Estimated install time is 4 hours with moderate difficulty