00029-06 HitchLink PRO 2.0

Features:

• Machined USA billet aluminum
• 50,000-61,000 lb breaking strength
• Fits standard 2" receivers
• Fits common 3/4" screw pin shackles/D-Rings
• Large machined radius on shackle mount hole for soft shackle compatibility
• Unique cylindrical surface to support steel shackle pins
• Cross drilled for horizontal or vertical rigging orientation
• Powder coated for oxidation protection

The Factor 55 HitchLink PRO 2.0 Allows for Using the Receiver as a Recovery Tow Point

When you are able to get away from civilization and off of the comfort of paved roads, it can really be a mind-clearing experience, but if you are not fully prepared for what the natural world has in-store for you, then you could end up stuck somewhere with no one that can help. Having all of the available recovery parts and accessories is important before you make your journey off the grid, especially if you are discovering some place new. There are going to be times that you need to use your receiver as a recovery tow point. The Factor 55 HitchLink PRO 2.0 provides the best way to do just that.

50,000-61,000 LB Breaking Strength

The Factor 55 HitchLink PRO 2.0 features a machined USA billet aluminum construction that is only. It is easy to store in your vehicle with the rest of your recovery accessories. The raw strength of the HitchLink PRO 2.0 is unmatched. It has a breaking strength of 50,000-61,000 lb, which gives you enough towing muscle to pull whatever you need. To protect against oxidation, it is finished with a powder coat. You might be excited about getting one of these for your recovery accessory toolbox, but first you must make sure it is going to be the right fit. The HitchLink PRO 2.0 fits all standard 2" receivers and common 3/4" screw pin shackles/D-Rings. If you have soft shackles, there is a large machined radius on shackle mount hole that allows for compatibility. For steel shackles, there is a unique cylindrical surface that supports them, so they are compatible as well.

Fitment: Universal

Important Notes:

• Never exceed factory receiver hitch pull rating
• Always use a quality steel alloy 5/8” hitch pin
• Always pull in line with the hitch, do not bind or side load the shackle