If you’re the kind of guy who lives for the roar of a turbo spool, the grunt of a torqued-out diesel, or the thrill of laying into the throttle, then you know that keeping tabs on your truck's performance is key. Whether you’re chasing horsepower, dialing in for towing, or just making sure your rig is running right, the Edge Insight+ is about to be your new best friend. This isn’t just another fancy screen—this bad boy now supports custom tuning! That means more power, better drivability, and total control over your truck’s potential.

Custom Tuning Now Built In – Time to Unleash the Beast

For years, the Insight CTS3 has been a go-to for diesel guys who want real-time data at their fingertips. But Edge just cranked things up to the next level with the Insight+—because now, you can flash custom tunes straight from the unit. No more extra devices, no more complicated setups—just plug in, tune up, and send it.

By working with approved third-party calibrators, the Insight+ lets you tweak your truck’s Powertrain Control Module (PCM) and Transmission Control Module (TCM) to get the most out of your setup. Whether you’re looking to:

• Crank up the horsepower and torque
• Squeeze out better MPGs
• Sharpen up those shift points
• Make towing a breeze

…this unit’s got your back.

The Insight+ is a must-have for owners of the 1994–2007 Ford Power Stroke and 2017–2023 GM L5P Duramax. The 7.3L Power Stroke is an absolute tank, and it loves a good tune-up. The 6.0L and 6.4L Power Strokes need smart tuning to keep them running strong, and the L5P Duramax? Well, let’s just say GM tried to lock it down, but the Insight+ just broke it wide open.

The best part? The Insight+ is compatible with some of the top custom tuning companies in the industry, so you can rest easy knowing your truck is getting the best possible calibrations available.

But don’t sweat it if you’re running something else—this unit works with just about any diesel or gas truck. Cummins? Yep. Power Stroke? Of course. Duramax? Absolutely. Even gassers can get in on the action. No matter what you drive, if you want full control over your rig, this is the tool for you.

More Than Just Tuning – Keep Your Truck in Check

Tuning is just the beginning. The Insight+ still packs all the badass monitoring capabilities that Edge is known for. With this setup, you can keep an eye on everything that matters under the hood:

• EGTs (Exhaust Gas Temperatures) – Stay on top of your temps and avoid cooking your turbo.
• Regen Cycles – Keep track of when your diesel particulate filter (DPF) is cleaning itself out.
• Boost Pressure – See exactly how much air you’re stuffing into that motor.
• Fluid Temps – Monitor your engine oil, transmission, coolant, and more.
• Rail Pressure & RPMs – Watch fuel delivery and engine performance in real time.

With this level of insight, you can catch small issues before they turn into big problems and make sure your rig is always running at peak performance.

Built for Those Who Like to Dial It In

The 5-inch capacitive touchscreen is crisp, responsive, and fully customizable. No clunky menus, no lame preset displays—just a clean, high-res interface that lets you set up your gauges the way you want. Change layouts, swap colors, and track the data that matters to your truck.

Test It, Log It, Perfect It

What’s the point of making power if you can’t see what it’s doing? The Insight+ comes locked and loaded with performance meters so you can test things like:

• 0-60 mph times
• Quarter-mile runs
• Other acceleration benchmarks

And with advanced data logging, you can record your runs, analyze the numbers, and fine-tune your setup to get even more out of your truck.

Upgrading from the Insight CTS3? It’s Stupid-Easy

Already rocking an Edge Insight CTS3? Good news—you can upgrade to the Insight+ with a simple software update. Just plug it into a computer, run Edge’s Update Agent software, and boom—you’re in business. No extra hardware needed.

Why Every Truck Guy Needs the Edge Insight+

If you’re serious about performance, towing, or just keeping your truck running at its best, the Insight+ is a no-brainer. It’s the ultimate blend of real-time monitoring and full tuning control, all in one sleek, easy-to-use package. Whether you’re looking to:

• Drop the hammer and push big power
• Dial in the perfect tune for towing
• Get better fuel economy for those long hauls
• Keep your truck running strong for years to come

…this is the tool that does it all.

Final Thoughts

Whether you’re rolling coal, hauling heavy, or just making sure your daily driver is dialed in, the Edge Insight+ is the key to unlocking your truck’s full potential. Quit guessing, start monitoring, and take full control of your performance with the most advanced digital gauge and tuning tool out there.