Synergy Track Bar Ram 2500

Synergy Track Bar Features:

• Bent to clear most aftermarket differential covers
• Retains factory track bar mounting bolts & hardware
• Made from high quality 1.5" x .250" wall DOM tubing
• Allows centering of front axle when running a suspension lift
• Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
• Synergy double adjuster sleeve & pinch bolt assembly allows for adjustment of track bar length without removing control arm mounting bolt
• Features Synergy Dual Durometer Bushings (DDB) with Teflon® bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools

The 2003-2013 Ram Cummins Synergy Adjustable Track Bar Adds Strength Between the Frame and Axle

Pulling heavy loads in your 2003-2013 Dodge Ram Cummins requires a little more strength to get things moving properly. The 2003-2013 Ram Cummins Synergy Adjustable Track Bar offers more strength between the frame and axle, while being adjustable to allow for centering of the axle over uneven terrain without having to remove the control arm mounting bolt. If you are running some lift on your build, this track bar is absolutely essential to keeping the front axle centered. To ensure there are no annoying noises produced form metal on metal contact, each track bar features Synergy Dual Durometer Bushings (DDB) with Teflon® bearing surface. To ensure an easy installation process, each kit includes all the necessary hardware and the process can be completed with basic hand tools.

Parts Included:

• (1) Grade 8 Hardware Kit
• (1) Synergy Double Adjuster Sleeve
• (1) Synergy Dodge Front Track Bar

Fitment: 2003-2013 Dodge Ram Cummins

Important Notes:

• The trackbar can be adjusted from 38.625" to 39.438".
• The replacement adjustable joint is 4803-41 for 94-07 trucks and 4803-42 for 08-13 trucks.
• 8550-01 track bars built 5/19/2015 and newer, and 8550-02 track bars built 2/13/2015 and newer already come with Dual Durometer Bushings (DDB). Replacement bushings are 4324-01 or 4324-02 depending on bolt size.
• Replacement polyurethane bushing halves are 4306-01. Polyurethane bushings can be upgraded to Dual Durometer Bushings (DDB) one of two ways depending on bolt size: 94-07 trucks with 14mm or 9/16" bolt: Replace with 4323-01 Dual Durometer Bushing (DDB) or use 8529-01 Retrofit Kit; 08-13 trucks with 16mm or 5/8" bolt: Must use 8529-01 Retrofit Kit.
• 8550-11 track bars built 1/1/21 and newer will use 4327-01 Replacement bushings (4812-01 Forging with bushing for adjustable end).