null
×
close

Synergy 8012-13 Weld-On HD Front Track Bar Bracket 2.5 Inch Axle Tube | 07-18 Jeep Wrangler JK/JKU

(No reviews yet) Write a Review
$175.00
SKU:
SYN-8012-13
UPC:
887753145062

Synergy 8012-13 Weld-On HD Front Track Bar Bracket 2.5 Inch Axle Tube | 07-18 Jeep Wrangler JK/JKU

$175.00

Warning: This product can expose you to chemicals that are known to the State of California to cause cancer. For more information, visit www.P65warnings.ca.gov.

Synergy Jeep JK HD Weld-On Front Track Bar Bracket For 2.5 Inch Axle Tube
Details:



  • Fits 07-18 Jeep Wrangler JK and Jeep Wrangler Unlimited JK

  • Compatible with all lift heights, bracket can be trimmed for track bar bracket heights from stock, 1 Inch 2 inch +3 inch over stock height

  • Weld on design for strength and reliability

  • This bracket raises the vehicles suspension roll center by 3.0 inch

  • Bracket moves track bar closer to the axle centerline to clear aftermarket highsteer knuckles/tie rod at full steering lock

  • Raising the roll center reduces vehicle body roll and dramatically improves overall handling

  • Weld on tab included for mounting factory or aftermarket steering stabilizer up and out of harms way

  • Weld on tabs for steering assist rams included

  • Weld on sway bar relocation tab included

  • Laser cut from 3/16 inch steel

  • Requires the use of a minimum 3 inch bump stop spacer

Need help? We're available at208.719.7400 - Email us atsales@alligatorperformance.com orlive help
to top