SCT Livewire 5015 TS Competition Tuner | 08-10 Ford Powerstroke 6.4L

SCT Livewire 5015 TS Competition Tuner | 08-10 Ford Powerstroke 6.4L

SCT-5015-R

Be the first to review this product

$949.00

Highlights:



  • Includes 4 custom tunes:

  • 75hp | 150hp | 275hp | 325hp

  • Reads and clears DTC's

  • Works as a dash mounted monitor

  • Ability to add EGT probe

* Required Fields

$949.00

Description

WILL NOT SHIP TO CALIFORNIA

SCT Livewire 5015 CUSTOM TUNED 
 
Color Touchscreen Display
 
4 CUSTOM TUNES COME ALREADY PROGRAMMED ON THE DEVICE
 
2008-2010 Ford 6.4L Diesel
 
The CUSTOM TUNES do NOT require sensors to be in your Competition Pipe
 
Works with all exhaust gas recirculation aftermarket systems including new EGR elbow
 
Also has SCTs standard pre-loaded tunes if you’re waiting on your Competition Pipe
 
 
**All DPF-OFF tuning products are STRICTLY FOR RACE USE ONLY**
According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws.
 
 ***NOTE:  SCT RACE TUNERS ARE NOT ELIGIBLE FOR RETURNS.  ALL SALES ARE FINAL!  PLEASE REFER TO OUR RETURNS POLICY FOR FUTHER INFORMATION

Adjustable Vehicle Parameters

*Adjustable Options vary for each vehicle and are not available on all vehicles

  • Axle Ratio

    Correct the vehicle speedometer (and fuel efficiency calculations) if you have changed the gear ratio on your vehicle. If no gear ration modifications have been made to the vehicle, then choose the stock setting when the tuner prompts you to choose a gear ratio. This will ensure that no modifications are made to the stock program.

  • Disable DOD

    Allows you to disable / enable the Displacement On Demand functions of your vehicles PCM.

  • Fan Control

    Lowers the Temperature at which the Fan turns on.

  • Fuel Injectors

    Allows you to adjust for different sized fuel injectors.

  • Grill Shutter

    Adjusts calibration to compensate for removal of Grill Shutter

  • Idle Adjust

    Enable and select a value for Engine Idle position. This is a great feature for keeping voltage in the vehicle up while running auxiliary electronics off of the vehicle’s power system.

  • Jake Brake

    Used as an exhaust brake to increase engine braking while coasting towing heavier loads. Helps lower brake temperatures.

  • Locked At CT

    Keeps the torque converter locked during deceleration to aid in engine braking. This is less aggressive than the Jake Brake file so it may be ideal for smaller loads. It can be used in conjunction with the Jake Brake as well.

  • Multiple Displacement System (MDS)

    Enabling the MDS (Multiple Displacement System) initiates a fuel saving 4-cylinder engine mode and disables additional engine cylinders.

  • Rev Limiter

    Regulate the highest RPM that an engine can reach before the engine is electronically limited. Increasing the RPM limit is recommended only for racing purposes. Once of the most important ways to protect your engine from damage is to keep the RPMs from going too high. 

  • Shift Assist

  • Speed Limiter

    Change the top speed that the vehicle will reach before the engine automatically limits the power needed to go faster

  • Tire Size

    Correct the speedometer if you have changed your tire size from stock.

  • TPMS

    Change or disable the Tire Pressure Monitoring System.

  • Transmission Shift Firmness

    Change the shift firmness of an automatic transmission.

  • CMCV Delete

    Allows you to disable the CMCV (Charge Motion Control Valve) in your vehicles PCM to prevent a Check Engine light and other issues associated with removing the CMCV plates in your vehicle. 

  • Exhaust Y Pipe

    Support for Kooks High Flow Y Pipes

  • Front Mounted Intercooler

    Adjusts for the usage of a front mounted intercooler

  • Global Spark

    Allows addition or removal of timing across all RPM ranges

  • Headers

    Allows adjustment for Longtube headers

  • Intake Airbox

    Allows an aftermarket intake to be run on the vehicle without a Check Engine Light. For Intake Kits that require tuning, this will provide a selection of available intake kits.

  • Lock in 1-2-3

    Locks the converter in 1st, 2nd and 3rd. Aids in engine braking, increases fuel economy, and can be used for drag racing as well.

  • Mass Air Meter (MAF)

    Allows you to select from different aftermarket MAF (Mass Air Meters).

  • RPM Based Spark

    Allows you to Add or Remove Timing by RPM Range. (0-2000)(2000-4000)(4000-8000)

  • Sound Symposer

    Enable and Disable The Sound Symposer

  • Super Charger Pulley

    Supports aftermarket super charger pulley sizes.

  • Throttle Body

    Compensates for aftermarket Throttle Bodies (BBK 65/85/90 MM)

  • Torque Reduction

    Reduce torque durning shifting (makes shift more firm)

  • Traction Control

    Allows you to disable the vehicles Traction Control without using the button in the vehicle.

  • Transmission Shift Points

    Change the RPMs at which an automatic transmission will change gears.

  • Extended Features


    Built-In Wifi for easy updates

    Built-in Wifi allows you to easily attach to your local area wireless network to download device updates.


    Data Logging

    Need to monitor your vehicle's engine parameters? No need for a separate monitoring device. View & record your vehicle's PCM data on the device or on a PC.


    Easy Restoration Back to Stock

    The device backs up your factory PCM program during installation should you ever need to return your vehicle to the stock program. Restoring your vehicle to the stock PCM program is as easy as selecting "Return to Stock" from the device men...


    Increases Horsepower & Torque!

    Increases your vehicles Horsepower, Torque, Throttle Response and even Fuel Mileage


    Most Popular Vehicles Supported

    Most popular Ford vehicles supported including 2014 models.


    USB Interface Cable Included

    USB Interface Cable & Livelink Datalogging software included


    Clearing DTCs

    Reads & Clears PCM Diagnostic Trouble Codes.


    Dual Analog Inputs

    Monitor EGT temps, air-fuel ratio and other popular sensor data.


    Full Color Backlit LCD Display

    Full Color LCD display for easy viewing, day or night.


    Installs Quickly & Easily

    Installs quickly & easily via your vehicle's OBDII port.


    Stores 10 Custom Tunes

    Stores up to 10 custom tune files created by your local SCT Custom Tuning Dealer.


    User Adjustable Vehicle Parameters

    Adjust for common performance bolt-ons such as Cold Air Kits, Exhaust Systems & Gears