{"product_id":"fleece-fpe-cumm-ubfa-1324-heater-upgrade-kit-2019-2024-ram-2500-3500-6-7l-cummins-24v","title":"Fleece FPE-CUMM-UBFA-1324 Heater Upgrade Kit | 2019-2024 RAM 2500\/3500 6.7L Cummins 24V","description":"\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlug-and-play full-flow fuel heater upgrade\u003c\/li\u003e\n\u003cli\u003eMade for Fleece under-bed fuel filter base\u003c\/li\u003e\n\u003cli\u003eHeater switches on near 28°F\u003c\/li\u003e\n\u003cli\u003eHeater switches off near 48°F\u003c\/li\u003e\n\u003cli\u003eWarms fuel 4 to 8°F at typical flow\u003c\/li\u003e\n\u003cli\u003eHelps diesel keep flowing in cold weather\u003c\/li\u003e\n\u003cli\u003eTemperature-controlled on and off switching\u003c\/li\u003e\n\u003cli\u003eWorks with filter bases that have a heater provision\u003c\/li\u003e\n\u003cli\u003eMade for 2019-2024 RAM 2500\/3500 Cummins\u003c\/li\u003e\n\u003cli\u003eBacked by a 6 month limited parts warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWarm Your Fuel Before The Filter Sees It On Those Subfreezing Mornings\u003c\/h4\u003e\n\u003cp\u003eCold mornings are hard on a diesel because the fuel itself gets thick and can start to wax, which is the last thing you want reaching your filter. The Fleece plug and play heater upgrade is built to warm the fuel before that happens. It installs on your Fleece Performance under bed fuel filter base, which has a heater provision built in. The heater switches on when the fuel temperature drops to about 28 degrees Fahrenheit and switches off again at about 48 degrees, so it works on its own as the temperature changes. At typical fuel flow rates, Fleece says the fuel picks up between 4 and 8 degrees as it passes the heating element. That extra warmth helps the fuel keep moving when the temperature drops. It is also an easy add on if you already run the Fleece filter base, because you are only adding the heater and not replacing anything. For a 2019 to 2024 Cummins that works through the winter, it is a simple way to give the fuel system some cold weather protection.\u003c\/p\u003e\n\u003ch4\u003eSwitching Points, Temperature Rise, And What The Heater Needs To Work\u003c\/h4\u003e\n\u003cp\u003eThe Fleece FPE-FH-CUMM-1924 is a plug and play fuel heater upgrade for 2019-2024 RAM 2500 and 3500 trucks with the 6.7L Cummins. It is for use only on trucks equipped with the Fleece Performance fuel filter base FPE-CUMM-UBFA-1324, and the older base FPE-CUMM-UBFA-1924, which has been superseded to the 1324, also has the heater provision. The heater switches on at 28.4 degrees Fahrenheit, plus or minus 5.4, and switches off at 48.2 degrees, plus or minus 5.4. At typical fuel flow rates, Fleece says the temperature rises between 4 and 8 degrees across the heating element. Owners of 2013-2018 trucks need a different heater, part number FPE-FH-CUMM-1318. Fleece notes that its filter base does not fit Cab and Chassis applications. The heater is covered by a 6 month limited parts warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 2019, 2020, 2021, 2022, 2023, 2024 RAM 2500\/3500 6.7L Cummins 24V with Fleece Performance fuel filter base \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor use only with 2019-2024 trucks equipped with the Fleece Performance fuel filter base FPE-CUMM-UBFA-1324, the heater does not install on the factory filter housing\u003c\/li\u003e\n\u003cli\u003eThe superseded Fleece filter base FPE-CUMM-UBFA-1924 also has a heater provision and works with this heater\u003c\/li\u003e\n\u003cli\u003eThe filter base is sold separately, this kit is the heater upgrade only\u003c\/li\u003e\n\u003cli\u003eFor 2013-2018 trucks, use Fleece heater FPE-FH-CUMM-1318\u003c\/li\u003e\n\u003cli\u003eHeater switching points are ON at 28.4°F (plus or minus 5.4°F) and OFF at 48.2°F (plus or minus 5.4°F)\u003c\/li\u003e\n\u003cli\u003eAt typical fuel flow rates, Fleece says the fuel temperature increases 4 to 8°F across the heating element\u003c\/li\u003e\n\u003cli\u003eFleece states its filter base will not fit Cab and Chassis applications\u003c\/li\u003e\n\u003cli\u003eCovered by a 6 month limited parts warranty from Fleece\u003c\/li\u003e\n\u003cli\u003eCalifornia Proposition 65 warning applies to this product\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fleece Performance Products","offers":[{"title":"Default Title","offer_id":54755357393180,"sku":"FLCFPE-CUMM-UBFA-1324","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/2279\/8108\/files\/fpe-fh-cumm-1924-f2.png?v=1792700759","url":"https:\/\/www.alligatorperformance.com\/products\/fleece-fpe-cumm-ubfa-1324-heater-upgrade-kit-2019-2024-ram-2500-3500-6-7l-cummins-24v","provider":"Alligator Performance","version":"1.0","type":"link"}