2001-2019 GM 6.6L Duramax PPE Standard Profile Transmission Pan 128052020

PPE Standard Profile Transmission Pan Features:

• 3/4 Inch External Cooling Fins Reduce Oil Temps
• Robust Side Ribs to Provide Added Strength
• 1/8 and 1/4 inch NPT threaded ports for Gauge Sensors
• High-Strength Neodymium Magnet Equipped 304 Stainless Steel
• Retains use of High-Quality Original Allison Pan Gasket
• Allen Head Bolts
• Limited Lifetime Warranty

Durably Tough to Last

Replace the stock, stamped metal pan with one that will help keep your transmission cool and protected. Cast from high-grade aluminum alloy and holding stock fluid capacity, it is only 5 inches deep making this pan perfect for those who like their rides lowered to the ground and still running cool. Thanks to the 3/4 inch external cooling fins, the fluid will run much cooler than the stock pan. The PPE pans are tough, too! Thanks to its thick cast construction with external fins and the additional side ribbing, all PPE Transmission Pans are much stronger than the stock units.

Stainless Steel and Easy to Install

Each pan is equipped with 1/8 inch and 1/4 inch NPT threaded ports for easy installation of gauge sensors as well as one of PPE’s Neodymium magnet equipped 17mm hex head drain plug. The Neodymium magnet is an insanely strong magnet that attracts and holds harmful ferrous metal particles. Zinc-plated Allen head mounting hardware is supplied. The PPE Standard Profile Aluminum Transmission Pan is perfect for hot rod or marine applications.

What's Included:

• Drain Plug: Yes
• Filter Extension: No
• Filter: No
• Gaskets: No
• Bolts/Studs: Yes
• Temperature Sender Bung: Yes

Vehicle Fitment2001-2019 Chevrolet /GMC 2500/3500 6.6L Duramax