From the basics of a simple chip to increase horsepower, to the full on capability of a custom Tune, Alligator Performance has all of your Performance Needs covered. We carry the top name brands in the performance industry. Brands like Magnaflow, MBRP, Rare Parts, S&B Filters, EFI Live by Kory Willis, Cognito Motorsports and more, we are your One Stop Shop. If you have any questions, or need some advice for your build, give us a call at 208-292-4401 and talk to our Amazing technical staff, or email us at firstname.lastname@example.org. Alligator Performance, has the Power To Feed Your Diesel!
It is the largest drop-in cam that we sell.
Use with 62mm or larger single turbos or larger twins. This cam works great in 12v and 24v street trucks with stock head flow or with a ported head and stock size valves. For Common rail street trucks with larger valves and full tilt porting may we suggest the 178-208 to retain best bottom end. The intake is cut on a 99 centerline, performance springs and pushrods are recommended. If you have had your head or block surfaced, you need to verify piston to valve clearance.
For it to be "drop in" on a 12v you will need no more than .018" piston protrusion and at least .055" valve face depth with a standard head gasket and a 99 intake centerline. On a 24v you will need no more than .018" piston protrusion and at least .038" valve face depth with a standard gasket. If you do not meet the minimum requirements for piston to valve clearance, don't worry, you can still run an oversize headgasket or cut valve reliefs.