Push Rods

The Industrial Injection Cummins 24 Valve Stage 1 Billet Pushrods are designed to add strength and reliability to your 1998.5 - 2018 Dodge Cummins. For higher RPM and higher boost.

Replace worn or stretched OEM rocker shaft bolts before they become an issue. It's common for the OEM rocker bolts to stretch when installing them after head gasket service and not get to the correct torque. If the rocker shaft is not properly torqued to...

01 – 16 6.6 Duramax 3/8  x  .135 Wall 4130 Chrome Moly

Anytime an engine is used for higher RPM then stock or higher boost levels, there is a tremendous amount of stress on the pushrods, add an aftermarket cam with higher lift and some heavy duty valve springs and they are simply not sufficient. Install our...

Hamilton Cams extreme-duty pushrods are the result of intensive research to produce designs that create the perfect balance between weight and rigidity to maximize rpm. They provide extended longevity and superior operation under extreme conditions,...

The Industrial Injection Cummins 12 Valve Stage 1 Billet Pushrods are designed to add strength and reliability to your 1989 - 1998  Dodge Cummins. If you are running higher RPM and higher boost number than stock these billet pushrods are a...

The Industrial Injection Cummins 24 Valve Stage 3 Billet Pushrods are designed to add Ultimate strength and reliability to your 1998.5 - 2016 Dodge Cummins. If you are running over 4500rpm and over 100psi boost these Stage 3 Billet Pushrods are...

These Pushrods are used in the 7.3L Powerstrokes that are going run higher boost and higher rpm ranges.