Differential | Drivetrain

These zinc plated bolts attach the wheel bearing to the spindle, they require 133 Ft Lbs of torque when installed, which is why we recommend replacing them when changing out your wheel bearing. These bolts are notorious for wear and rust so we decided...

This Kryptonite Inner Spindle O-Ring is a direct replacement for your current GM part. Our O-Ring is meant to provide a barrier to protect the wheel bearing and axle of internal corrosion. We recommend replacing this with every Wheel Bearing...

This Lower Ball Joint is designed specifically for heavy-duty use, they will handle the toughest work that you can throw at them while delivering excellent performance. This Ball joint has a durable Black Oxide Finishing on it to resist corrosion and...

Now those of you with GM 1500 trucks have Equipped with internal heat sinks and external cooling fins, increasing the pan’s surface area helping dissipate heat. This makes for a much cooler and denser oil to lubricate with. Cool, dense fluid...

Mag-Hytecs heavy duty differential covers and transmission pans provide increased lubricant and cooling capacity for hard working recreational and service vehicles. Mag-Hytec covers and pans set your vehicle apart in both aesthetics and function cast in...

Banks started from scratch while sparing no expense in the creation of the Banks Power AAM 11.5" 14-Bolt Rear Ram-Air Differential Cover. Gale set out in search of the answer to the age-old "Do rear differential covers provide any real benefit or are...

Increase the fluid capacity and cooling capabilities of your rear differential while adding some style with this replacement differential cover from Mag-Hytec. Not only does this cover hold 8 quarts of oil while featuring finned aluminum construction for...

Average of double the fluid capacity Ease of Service The dipstick is knurled for quick removal, the flat is marked low/high to check lube level and a magnet, which acts as an open filter is in the lower end. The MS 7/8 - 14 THD port is large enough to...

Help keep your rear differential running cool and clean with an upgraded differential cover from PPE. Made in the USA from high-quality cast aluminum for strength and optimum heat dissipation. Combined with the largest set of cast cooling fins in the...

Average of double the fluid capacity Ease of Service The dipstick is knurled for quick removal, the flat is marked low/high to check lube level and a magnet, which acts as an open filter is in the lower end. The MS 7/8 - 14 THD port is large enough to...

Fits Dana 50 and Dana 60 Front Differentials for Ford Super Duty. Excursions, and F-250/350 Trucks  4 qt. Capacity Capacity Differential Cover Magnetic Drain Plug Magnetic Dip Stick 1/8" NPT port for Temp, Sender Stainless Hex...

Overall height 3 7/8″ 2X4 & 4X4 F-250, F350, – 1986 to 2016 including some 2017 with 12 Bolts on cover. Single Rear Wheel Includes: Bolt kit, Drain Plug and Dip Stick. Capacity: 6 Quarts

Help keep your rear differential running cool and clean with an upgraded differential cover from PPE. Made in the USA from high-quality cast aluminum for strength and optimum heat dissipation, PPE’s differential covers offer industry-leading fluid...

Tech Note:Does not fit Dually models; however, we do have the parts individually. Contact us for details. Gear package now includes rear pinion bearing spacer for 2008-10 models.Suffering from poor performance and reduced fuel economy resulting from...

The 2016 & Newer Tacoma is a fantastic vehicle, the new engine packs a punch into a fairly small displacement, and needs RPM's to operate efficiently and at peak performance. We have found the factory gearing to be inadequate even on stock vehicles...

Help keep your 2011+ GM’s front differential running cool and clean with an upgraded differential cover from PPE. With the largest set of cast cooling fins in the industry, found both inside as well as outside the pan, PPE’s differential...

Help keep your rear differential running cool and clean with an upgraded differential cover from PPE. Made in the USA from high-quality cast aluminum for strength and optimum heat dissipation, PPE’s differential covers offer industry-leading fluid...

Banks started from scratch while sparing no expense in the creation of the Banks Power AAM 11.5" 14-Bolt Rear Ram-Air Differential Cover. Gale set out in search of the answer to the age-old "Do rear differential covers provide any real benefit or are...

3 Degree Rear Pinion Angle Shim Kit for 99-18 Chevrolet and GMC 1500 trucks, 01-10 GM 1500HD/2500/2500HD/3500/3500HD 2WD/4WD trucks and 01-13 GM 2500 2WD/4WD SUVs. Used with short wheel base trucks with tall lift where no tapered blocks were available...

Cognito Heim steering spindle pin and hardware kit For 01-10 GM 1500HD/2500/2500HD/3500/3500HD 2WD/4WD trucks, 01-13 GM 2500 2WD/4WD SUVs and 03-09 GM Hummer H2 and H2 SUTs.Cognito is an industry leader in the design, development and manufacturing of...

Mag-Hytec has introduced a Dana 60 front differential cover that adds a quart of capacity over the stock cover (up from 3-3.5 quarts stock to 4-4.5 quarts). It is a perfect match in appearance and function to the rear differential covers. Perhaps the...

The Mag-Hytec GM 14-10.5-A Differential Cover adds styling, function, and protection to the rear end of your 1982-2000 GM 2500/3500 Pickup. This heavy-duty differential cover makes it easy to do fluid changes with its built-in magnetic drain plug, oil...

A Nitro gear change will help get that performance and economy back! If you've fitted larger tires to your vehicle then you are likely experiencing a loss in performance, fuel economy, and more constant transmission gear “hunting" - This is...

The 2016 & Newer Tacoma is a fantastic vehicle, the new engine packs a punch into a fairly small displacement, and needs RPM's to operate efficiently and at peak performance. We have found the factory gearing to be inadequate even on stock vehicles...

Now those of you with GM 1500 trucks have Equipped with internal heat sinks and external cooling fins, increasing the pan’s surface area helping dissipate heat. This makes for a much cooler and denser oil to lubricate with. Cool, dense fluid...

Our Dodge/Ram Diff cover is equipped with internal heat sinks and external cooling fins, increasing the pan’s surface area helping dissipate heat. This makes for a much cooler and denser oil to lubricate with. Cool, dense fluid lubricates better,...

Fabricated Aluminum Rear Differential Cover for AAM 11.5 Axle for Dodge and GM HD Trucks

8.25" standard open carrier case 3.42/up gear ratio. The deck height is different for 3.08 applications.

Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken...

The new ADD stock replacement spindle will enhance the drivability of any truck and will work with both stock and replacement upper control arms, lower control arms, tie-rod ends and stock brake kit. Aside from the added strength, one of the many unique...