Intercoolers | Piping | Boot Kits

Banks boost tube is larger than the factory pipe and designed to work with the stock elbow and intercooler to improve airflow, and allow the turbocharger to spool up faster. Banks cold side tube has 65% greater flow area than stock tube. Produced from...

1 Piece 3" Driver Side Intercooler pipe that was designed to replace the factory pipe and low-quality silicone boots. This Intercooler pipe compliments our S400 over stock twin turbo kit or LB7 Y-Bridge Kits. It is a full 3" intake tract from Turbo to...

BladeRunner 3 IN Aluminum Hot and Cold Intercooler Tube Kit Black Ford Diesel Trucks 11-16 V8-6.7L (td)Bladerunner Intercoolers represent the next generation of intercoolers. The Bladerunner intercoolers utilize a 3 in. bar and plate design that out...

Rather than a stainless steel pipe and two silicone couplers, a single 5-ply stainless reinforced silicone hose is included to connect the intercooler to the supplied HSM billet hose adapter assembly. This means two "clamped" connection points have been...

The Pusher 24VS2GWCA Intake Manifold w/ Cross-Air for your 98.5-02 Dodge 5.9L Cummins is designed to increase airflow and engine performance in your truck. Built from full TIG welded, 3” mandrel bent tubing, with a laser, cut 1/2" flange and 1/4"...

Pusher 3.5" MEGA passenger side intercooler tube for Cummins 6.7L turbo diesel engines in 2007.5-2009 Dodge Ram pickup trucks. Features This tube is a perfect compliment to the well known 3.5" Pusher MEGA Intake System. Included are the necessary...

Here at SDP, we've designed a hot side/driver side IC pipe for the 2001-2010 Duramax trucks that fits perfectly with the stock turbo in place. Each pipe is made in-house using precision tig welding with mandrel bent tubing. To get the best possible...

LLY, LBZ, LMM Duramas One Piece High Flow 3" Driver Side Intercooler pipe. Replaces the 2 1/2" OEM inter cooler with a full 3" pipe. The OEM Pipe uses a reverse style bead roll design at the turbo which is prone for blowing off of the turbo under higher...

2003-2007 5.9L Cummins High Flow 3.5” Intake Horn and Driver Side Intercooler Pipe Kit. Kit replaces the failure prone 3” plastic OEM intercooler pipe with a 3.5” heavy duty 14g Aluminum intercooler pipe and the OEM cast intake horn...

The only High Flow 3” Complete Y-Bridge kit on the market for your LB7 that is compatible with the factory turbo! Also compatible with S300 or S400 single turbo install kits! Replace the restrictive OEM Y-bridge and cold side intercooler pipe with...

BladeRunner 3 IN Intercooler Tube Cold Side GM Diesel Trucks 04.5-05 V8-6.6L (td) LLYThe aFe intercooler tube represents the next generation of Diesel performance products. This intercooler tube produced 16hp and 49lbs. x ft. of torque on the dyno while...

BladeRunner 3 IN Intercooler Tube Hot Side Black GM Diesel Trucks 04.5-10 V8-6.6L (td) LLY/LBZ/LMMThe aFe Bladerunner intercooler tubes produce 20 hp and 63 lbs./ft/ torque and outflow the factory tubes by 45 percent. With the increased flow of this...

BladeRunner 3 IN Aluminum Hot and Cold Intercooler Tube Kit Black Dodge Diesel Trucks 94-02 L6-5.9L (td)Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April,...

BladeRunner 3 IN Aluminum Hot and Cold Intercooler Tube Kit Black GM Diesel Trucks 11-16 V8-6.6L (td) LMLAdvanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in...

BladeRunner 3 IN Intercooler Tube Cold Side GM Diesel Trucks 11-16 V8-6.6L (td) LMLThe aFe intercooler tube represents the next generation of Diesel performance products. This intercooler tube produced 16hp and 49lbs. x ft. of torque on the dyno while...

BladeRunner 3 IN Intercooler Tube Hot Side Black Dodge Diesel Trucks 13-18 L6-6.7L (td)Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was...

BladeRunner 3 IN & 3-1/2 IN Aluminum Hot and Cold Intercooler Tube Kit Black GM Diesel Trucks 17-19 V8-6.6L (td) L5PThis BladeRunner intercooler tube kit delivers more flow and is more robust to handle higher horsepower and boost than the factory...

Superior to stock, everything about Banks Techni-Cooler Intercooler system is bigger. It includes mandrel-bent 3.5 inch high-flow boost tubes... large, high-efficiency all-aluminum end tanks... a wide-open inlet and outlet... a 20% thicker core area with...

Superior to stock, everything about Banks Techni-Cooler Intercooler system is bigger. It includes mandrel-bent high-flow boost tubes - large, high-efficiency all-aluminum end tanks - a wide-open inlet and outlet - a thicker core area with an improvement...

Are you running the new bad-ass Banks Monster-Ram for the 6.7L Cummins? Banks boost tubes are larger than the factory pipe and designed to work with the stock elbow or new Banks Monster-Ram (3.5" or 4") which will improve airflow, and allow the...

Are you running the new bad-ass Banks Monster-Ram for the 6.7L Cummins? Banks boost tube is larger than the factory pipe and designed to work with the stock elbow or new Banks Monster-Ram (3.5" or 4") which will improve airflow, and allow the...

Mishimoto is proud to release a direct-fit silicone boot kit with DuraCore™ technology designed specifically for the 6.0L Ford Powerstroke. Mishimoto DuraCore™ technology is the synthetic material that comprises the innermost layer of all...

Mishimoto is proud to release a direct-fit silicone boot kit with DuraCore™ technology designed specifically for the 6.0L Ford Powerstroke. Mishimoto DuraCore™ technology is the synthetic material that comprises the innermost layer of all...

Mishimoto has developed an intercooler pipe and boot kit for the 2003-2007 Ford 6.0L Powerstroke. Factory piping has numerous restrictive bends that impede airflow and choke the power of your truck. The Mishimoto Powerstroke intercooler piping is...

Don't get stuck stranded on the side of the road with a broken plastic factory cold-side intercooler pipe! Mishimoto has developed a cold-side intercooler pipe and boot kit for the 2011-2016 6.7L Powerstroke after hearing countless stories of truck...

Mishimoto has developed a hot-side intercooler pipe and boot kit for the 2011-2016 6.7L Powerstroke. Upgrade to the Mishimoto kit for increased reliability, durability, and performance. The Mishimoto Powerstroke Hot-Side Pipe is...

The Mishimoto MMINT-DMAX-06K Intercooler Pipe & Boot Kit for your 2006-2010 GM 6.6L Duramax improves airflow, substantially decreases air-charge temperatures, and supports your truck at any power level. The Mishimoto intercooler piping is the first...

Mishimoto has expanded their Duramax performance parts line to include the performance intercooler for the 2011+ Chevrolet/GMC 6.6L Duramax LML. High intake and exhaust gas temperatures can reduce performance and potentially cause engine damage. Protect...

Mishimoto has released a performance intercooler kit for the 2003-2007 Ford 6.0L Powerstroke. This kit includes everything you need to improve airflow, substantially lower air charge temperatures, reduce EGTs, and support your truck at any power level...

Mishimoto has released a performance intercooler for the 2003-2007 Ford 6.0L Powerstroke. A high-powered 6.0L engine needs an intercooler that can effectively reduce intake temperatures and withstand high pressures. The Mishimoto 6.0L Powerstroke...