2011-2016 GM 6.6L Duramax 2500HD / 3500HD Fleece CP3 Conversion Kit w/ Pump FPE-LML-CP3-WP

2011-2016 GM 6.6L Duramax 2500HD / 3500HD Fleece CP3 Conversion Kit w/ Pump Features:

• New Bosch CP3
• High flow CP3 feed and return fittings
• Preformed feed and return fuel lines
• 50-state compliant; EO Number D-834-1 Kit

The 2011-2016 GM 6.6L Duramax 2500HD / 3500HD Fleece CP3 Conversion Kit w/ Pump Prevents Factory CP4 Failure

If you want to make sure your 2011-2016 GM 6.6L Duramax 2500HD / 3500HD has the reliability and fueling capabilities needed to take on any higher horsepower applications. The best way to do that is with the 2011-2016 GM 6.6L Duramax 2500HD / 3500HD Fleece CP3 Conversion Kit w/ Pump. It prevents any potential failure of the factory CP4, which has proven to be less reliable and capable overtime. Replacing it will be expensive and require a replacement of the entire fuel system. With this kit, you can convert to a CP3 that will be much less expensive and does not require a tuning kit. Included in the kit are Fleece's exclusive molded hoses, high-flow CP3 fuel fittings, and a valley feed line to support any future aftermarket lift pump applications.

Parts Included:

• New Bosch CP3 high pressure injection pump
• CP3 to rail high pressure fuel line
• High flow CP3 feed and return fuel fittings
• Preformed feed and return fuel lines
• CP3 mounting adapter
• Dosing injector feed line
• Regulator extension harness
• Fuel temperature sensor mounting bracket
• Low pressure fuel feed lines
• Hardware kit

Fitment: 2011-2016 GM 6.6L Duramax 2500HD / 3500HD