2022-2023 Toyota Tundra ICON 1.25"-3.25" Stage 4 3.0 Suspension System (Billet) K53214

Tundra ICON 1.25"-3.25" Stage 4 3.0 Suspension System Features:

• Vehicle specific design for 2022-2023 Toyota Tundra
• 3.0 Series front coilovers with ICON’s multi-stage, tunable hydraulic “Bump Zone”
• Adjustable front ride heights from 1.25-3.25” of front lift over stock
• ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings
• ICON Intelligent Control (IIC) uses onboard sensors to monitor G-forces and movement of vehicle chassis
• Billet aluminum UCAs for added strength, durability, and on-vehicle caster/camber adjustment
• UCAs feature the patented Delta Joint Pro with 90 degrees of total articulation
• Included sway bar drop brackets reduce bind in OE sway bar links
• Allows for up to 40% increase in front wheel travel over stock
• Billet rear upper and lower links improve rear end articulation
• 2.5 Aluminum Series rear remote reservoir shocks provide increased performance
• All ICON shock absorbers are fully rebuildable and re-tunable

Premium ICON Suspension Lift System with Billet UCAs and CDEV Shock Technology

Elevate your 2022-2023 Toyota Tundra's performance to new heights with the ICON Vehicle Dynamics Stage 4 3.0 Suspension System, a comprehensive upgrade that redefines both on- and off-road capabilities. Building upon the Stage 1 3.0 system, this Stage 4 kit takes it to the next level with the inclusion of CDEV and ICON Intelligent Control (IIC) for active compression damping adjustment right from your vehicle's cockpit. The heart of this system lies in the 3.0 Series coilover shocks featuring CDE Valves. These adjustable coilovers provide a remarkable 1.25-3.25 inches of lift height adjustability over stock when used with the included ICON billet front upper control arms. This additional lift allows for the use of larger, more aggressive wheel and tire combinations, enhancing your Tundra's stance and capabilities. The 3.0 Series shocks offer a 50% larger piston surface area in the ride zone and an astounding 100% more in the "Bump Zone" compared to 2.5 Series shocks. The multi-stage hydraulic Bump Zone ensures superior bottom-out resistance, maintaining vehicle dynamics during tough hits or unexpected obstacles.

ICON Intelligent Control with CDEV Technology

With a focus on control, ICON Intelligent Control (IIC) takes the guesswork out of terrain navigation by making near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock. And it's all at your fingertips through the IIC app on your phone. IIC utilizes onboard sensors to monitor G-forces and vehicle chassis movement, along with user-defined settings, to make near-instantaneous compression damping adjustments via the Compression Damping Electronic Valve (CDEV). These electronically controlled valves regulate oil flow to fine-tune damping force when the shock compresses, providing an infinitely variable adjustment that reacts in less than 40ms. Custom-tailored hydraulic circuits further enhance precision, delivering the highest resolution and dynamic range for your specific vehicle. The result is an unparalleled driving experience, whether you're conquering rugged trails or cruising city streets.

High-Quality Construction & Design

The included ICON billet aluminum upper control arms improve your Tundra's overall performance by correcting front-end geometry, offering increased on-vehicle camber and caster adjustment, and ensuring superior suspension component clearance. The revolutionary ICON Delta Joint PRO replaces the OE ball joint, allowing for full bump and droop travel of the front suspension while eliminating bind. Furthermore, sway bar drop brackets are included to minimize sway bar link bind, promoting smoother suspension travel and ensuring your Tundra can achieve its full range of wheel travel without overstressing OE components. The ICON billet aluminum adjustable rear upper and lower links are CNC machined from 6061 aluminum and anodized for corrosion resistance. These link arm kits feature PTFE-lined FK rod ends for increased suspension articulation and reduced deflection. The 2.5 Aluminum Series rear remote reservoir shocks, tailored for the 2022-2023 Tundra, offer a larger diameter for outstanding off-road performance and a smooth on-road ride. Remote reservoirs maintain consistent damping, even during heavy use, and feature an internal Bump Zone for added damping force during hard bottom outs. With full rebuildability and retuning capabilities, this Stage 4 Suspension System ensures that your Tundra is equipped for any adventure.

Vehicle Fitment: 2022-2023 Toyota Tundra

Wheel and Tire Fitment:

• OEM Wheels & Tires Fitment: Yes
• Recommended Aftermarket Wheels: 17x8.5" w/ 5.75” Backspace / 25mm Offset
• Recommended Aftermarket Tires: 35" x 12.50" (Minor fender trimming and modifications may be required)

Application Notes:

• Shocks are fully serviceable. Lift heights indicated are for a stock equipped vehicle.
• Advertised lift height ranges are for a stock equipped vehicle. Increasing weight of vehicle due to accessories will alter lift range.
• Not compatible with Tundras equipped with load-leveling rear height control air suspension.
• For 4WD models without TRD Off-Road package, ICON recommends using ICON Diff Drop (Part# 55156) or using Toyota TRD axles (Part# 434200C020 Driver / 434100C020 Pass). Failure to do so could result in front axle damage. Not required for TRD Pro.

Tech Notes:

• If upgrading a Tundra equipped with Adaptive Variable Suspension (AVS) all other vehicle systems remain functional
• Most Tundra sub-models equipped with i-Force gasoline engine will have front lift height range of 1.25-3.25" over stock
• Most Tundra sub-models equipped with i-Force MAX hybrid engine will have front lift height range of .75-2.75" over stock
• Tundra SR5 equipped with TRD Sport Suspension package will have lift height range of 2.25-4.25” over stock
• Tundra TRD Pro will have lift height range of 0-1.75” over stock
• Included rear shocks are compatible with 0-1.5" of rear lift over stock on models equipped with rear coil springs without TRD suspension package. Rear shocks are compatible with 0-1" of rear lift over stock on models equipped with rear coil springs with TRD suspension package and TRD Pro.
• Tundras equipped with automatic leveling headlights also require part # 55153

Kit Includes:

• 22-23 TUNDRA/23 SEQUOIA 3.0 VS RR CDEV COILOVER KIT (58775E)
• 22-23 TUNDRA/23 SEQUOIA BILLET UCA DJ PRO KIT (58561DJ )
• 22-23 TUNDRA/23 SEQUOIA SWAY BAR DROP KIT (55154)
• 22-23 TUNDRA/23 SEQUOIA BILLET REAR LOWER LINK KIT (54002)
• 22-23 TUNDRA/23 SEQUOIA BILLET REAR UPPER LINK KIT (54102)
• 22-23 TUNDRA/23 SEQUOIA IIC INSTALL KIT (53508)
• 22-23 TUNDRA 0-1.5"/23 SEQUOIA 0-3" REAR 2.5 VS CDEV RR PAIR (57840EP)