Gauge Accessories

The EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn, can cause engine damage. This kit is ideal for the daily diesel driver or if you are towing then...

Type K (chromel-alumel) thermocoupler, designed for high-temperature applications (designated by HT in part number), 0-2000°F, and has a Inconel tip and steel fitting for use in gasoline, propane or diesel applications. Units ending in 'PL' have a...

Type K (chromel-alumel) thermocoupler, designed for standard temperature applications, 0-1600°F, and has a brass fitting for use in diesel applications. Units ending in 'PL' have a weather pack connector on the end of the leads for use with...

Required for installation of 30 psi Fuel Pressure gauges on '98-02 Dodge Cummins Diesel Applications in order to protect sending units from excessive pressure spikes during start up. 1/8" NPT Male to 1/8" NPT Female.

The T1028 is a service replacement part for the DiabloSport inTune i3, i2, I-1000, and I-1000-DCX \\"ipod\\" style connector. This cable works for all inTune i2 products. Note that this cable should only be used on inTune I-1000 and I-1000DCX products...

The EAS Universal Turbo Timer part # 98604 is designed for all diesel engines besides the 2006-2011 Dodge Cummins. The 2006-2011 Dodge Cummins EAS Turbo timer part # is 98612. The 2006-2011 Dodge Cummins uses different connectors for installation.  ...

The EAS Universal Sensor Input provides the ability to read any 0-5 volt signal and translate that signal a meaningful value for display on the Edge CS or CTS. This means you can add custom temperature, pressure, Air/Fuel and even Travel/Position gauges...

Edge EAS pressure sensors come equipped with the proper wires and connectors to plug right into the Universal Sensor Input system. This will save you time and money on cutting, splicing, and crimping wire terminals to connect the sensor. Edge Accessory...

This is a tremendous new feature for truck owners! Customers can now hook up accessories like aftermarket lights, air compressors, etc. and engage them from the CTS. Install the new switch and use Edge's MyStyle software to name your accessory to display...

The 2006-2011 Dodge Cummins EAS Turbo timer part # is 98612. The 2006-2011 Dodge Cummins uses different connectors for installation. The EAS Universal Turbo Timer part # 98604 is designed for all diesel engines besides the 2006-2011 Dodge Cummins. A...

The EAS 12 Volt Power Kit enables any Insight CS2 or CTS2 to work with vehicles that don't have an OBDII port! By connecting to a key-switch power and ground source, an Insight becomes a digital gauge display for anything that you want to monitor! With...

The EAS Control Kit gives user the ability to monitor EGTs and adds the power switch to control multiple accessories with an On/Off digital power switch. The EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to...

The ISSPRO Performax Electronic Control Module is required for all Performax gauges to work. Only one ECM is necessary for up to 17 Performax gauges. Each gauge comes with the required sensors, harness, and components needed for a typical installation.

This wiring harness was designed for connecting ISSPRO Classic and EV series tachometer gauge to a Pre 1992 Dodge Turbo Diesel truck.

Quality aluminum mounting brackets & thumb nuts . Package of 3.

Quality aluminum mounting brackets & thumb nuts. Package of 3.

1/8" NPT Male Thread.

Quality molded black plastic mounting brackets with aluminum thumb nuts and washers. Package of 3.

1/8" NPT Male Thread.

For use with Short Sweep Electric Oil Pressure Gauges. 1/8" NPT Male Thread. Includes 1/4" NPT Adapter fitting.

For use with Short Sweep Electric Oil Pressure Gauges. 1/8" NPT Male Thread. Includes 1/4" NPT Adapter fitting.

Replacement Wideband 02 Sensor for all Auto Meter Wideband Air/Fuel Gauges.

For Narrowband Air/Fuel Ratio gauges (includes sensor, weather pack harness, and weld fitting). Not compatible with Wideband Air/Fuel Gauges.

1/8" NPT Male Thread.

1/8" NPT Male Thread.

For full sweep electric boost/vac gauges.

For Full Sweep Electric Boost/Vac gauges only.

1/8" NPT This is a replacement sending unit for the discontinued Low Temp Full Sweep Water Temperature gauges with the Black Box interface module.

Sender Harness Only For Low Temp Sender Model 2250