These injectors come with a new copper crush washer and o-rings for installation. Injectors are an OEM Genuine part that is a direct replacement injector. When replacing the injectors in your 5.9L...
Warning: This product can expose you to chemicals that are known to the State of California to cause cancer. For more information, visit www.P65warnings.ca.gov.
The Industrial Injection 125hp / 46% Over Race 2 Injectors have been extrude honed and balanced to a perfect matching set injectors that flow 35LPM. The Race 2 125HP / 46% Over injectors should be ran with one of our Phatshaft turbos or our compound turbo setups to run more efficiently and to help reduce EGTs. We Also recommend a CP3 upgrade like our 85% over Dragon Fire Pump. We typically see a 1-3MPG increase in fuel economy. We balance the injectors to a tighter tolerance than the original manufacturer and have put a lot of time into making these the best injectors money can buy. All the injectors we build in house are built with BRAND NEW Bosch OEM parts including the nozzles.
These injectors come with a new copper crush washer and o-rings for installation. Injectors are an OEM Genuine part that is a direct replacement injector. Each injector is individually tested on a state of the art Bosch test stand to ensure that they meet or exceed OEM specifications. Each test includes a resistance test, system leak test, purge, idle speed test, mid load test, full load test, and static back leak test. Each test cycle checks solenoid response time, back leak flow, and fuel delivery.
When replacing the injectors in your 5.9L Common Rail we highly recommend replacing the injector connecting tubes to avoid new injector contamination. The most common failure of new injector installations is contamination and the problem that we see most on these comes from the injector connecting tubes.
*Each injector has a $150 core charge and is fully refundable if they are shipped back within 30 days.
All Industrial Injection products are covered by a one year/unlimited mile warranty.
ARP Pro Series cylinder head studs are cold-forged to ensure molecular integrity. They are heat-treated prior to thread rolling and machining. ARP Pro Series kits are also available with 12-point...
Fass Fuel systems
The Titanium Signature Series diesel fuel lift pump was engineered by FASS Fuel Systems to be the top-performing, longest lasting and most reliable aftermarket filtration system in the diesel...
The Industrial Injection 100hp / 25% Over Race 1 Injectors have been extrude honed and balanced to a perfect matching set injectors that flow 30LPM. The Race 1 100HP / 25%...
Dodge 04.5-07 Injector Set: Brand New injectors flowing at 30 percent over. The injector set can support up to 650 RWHP with proper supporting modifications. The biggest injector recommended for...
Dodge 03-04 Common Rail New Injectors: Built to support up to 900 RWHP. Recommend modified or dual CP3. Sold as a balanced set upon completion of race waiver. New injectors NOT Remans
Sway Bar End Link Kit; Dual Pivot Design; Incl. Cast Line/U-Bracket/Bushing Kit/Bolts/Nuts/Washers;Due to the heavy demands put on the Dodge Ram 4WD pick-ups, one of those pesky maintenance items...