This Sport lift kit is Fabtech’s most popular Jeep system providing increased ride height and suspension performance at a great price. Installation is easy and can be installed in a...
Warning: This product can expose you to chemicals that are known to the State of California to cause cancer. For more information, visit www.P65warnings.ca.gov.
This Trail Lift Kit provides enhanced suspension performance to address all variants of off highway travel use including rock crawling, aggressive trail use and overland expeditions. This Gladiator lift kit has been tuned with proper dual rate coil springs and shock valving to provide a very compliant ride that you will appreciate.
The system is a complete short arm suspension that utilizes the factory lower control arm mounts for an easy installation. The Fabtech lower link arms are constructed of thick wall steel tubing that are guaranteed never to bend. They come with large polyurethane bushings on one end with internal threads on the other to accept the groundbreaking Fabtech 5 Ton Joint® for longevity and a quiet ride.
Fabtech’s dual rate Gladiator coil springs are corner specific to the Jeep JT. This keeps the vehicle level side to side and allows for increased suspension travel. The first stage of the spring provides a soft ride with the ability to extend for additional travel. The second stage is designed to handle the payload of the vehicle and address large impact absorption at higher speeds.
To address the steering geometry with the increased ride height, a Draglink Flip kit along with a heavy duty Track Bar bracket is included. This relocates the Gladiator steering geometry to the factory plane allowing for full articulation without binding the draglink ends in extreme conditions.
The rear Gladiator suspension receives a heavy duty Track Bar bracket to center the axle under the vehicle with the new ride height and help retain the factory roll center of the vehicle.
Front and rear bumps stop extensions protect the Jeep Gladiator suspension from over cycling.
This popular Jeep Gladiator lift kit is a top choice for daily drivers that enjoy tackling tough trails and overlanding with the comfort that they have a high quality complete suspension under their Gladiator.
Each Fabtech component has been designed with specific features and benefits that create this quality suspension system.
Exclusively for the Jeep JL, The Grumper Fender was engineered to tie directly to the 2nd Gen Grumper (GR4650-1) and presents the first ever fender to front bumper integration. Key features include...
From Concept to Reality…The GRUMPER Truck offers a revolutionary combination of both grille and winch bumper. Fully Customizable with removable inserts, this aggressive yet sophisticated piece...
From Concept to Reality… Building off the radical design of “The LEGEND”. The GRUMPER offers a revolutionary combination of both grille and winch bumper. Fully Customizable...
Sway-bar drop brackets are required with 4-6-inch suspensions when vehicle is equipped with front sway-bars.Rough Country's Front Sway Bar Drop Brackets for 4-6-inch Lifts - 1018
Fuel Injector; Common Rail; Exchange; Stage 3; 120 HP; Set Of 6;Flow matched high performance exchange common rail (CR) injectors supporting 60hp up to 180hp, 33% to 93% over. OE quality nozzles are...
Screamer Performance Exchange Turbo; HE351 Turbo;BD Diesel Performance is unique among its peers in that it designs, manufactures and distributes a wide range of products specifically engineered for...