Lift Accessories

These pins replace the alignment pins in the GM vehicles listed. The pins make it easier to align the vehicle and often become bent or crushed and need to be replaced. This kit includes 8 pins, enough for both sides. Fits 2011-2020 Chevrolet and...

If you require more clearance between the Diff Cover and your rear sway bar, the Banks Sway Bar Spacer Kit is what you need. Simple bolt-on application. Does not require modification to the vehicle's axle or sway bar.

Designed for the AAM American Axle found under Heavy Duty Dodges, the Carli Axle Truss is a crucial component for the avid off-roader that routinely puts their truck in extreme situations. The factory AAM axle is susceptible to bending from the forces...

The carrier bearing drop is needed for all 4.5″ trucks that have a 2 piece driveshaft. The kit comes complete with new hardware and four – 1/4″ thick shims to give you tunability in setting up your driveline angles.

Fabricated, fully boxed Passenger’s Side replacement shock mount. A necessity when running large shocks like in our Dominator 3.0 and Unchained 3.5 kits.

The factory rear shock mounts are sufficient to 2.5″ remote reservoir shocks. Once valving starts to stack up or larger than 2.5″ shocks are installed, the driver’s side upper, rear shock mount’s inability to take a beating should...

Fabricated, fully boxed Passenger’s Side replacement shock mount. A necessity when running large shocks like in our Dominator 3.0 and Unchained 3.5 kits.

Cognito Differential Mount Conversion Bracket kit for 2001-2010 Chevrolet and GMC 2500HD / 3500HD 4WD trucks. This bracket adds the upper driver side mount back to the front differential.The bracket is formed and fabricated with a semi-gloss powder coat...

Cognito Adjustable Front Limit Strap Kit for 99-06 Chevrolet and GMC 1500 2WD/4WD (torsion bar front end) trucks and 00-06 GM 1500 2WD/4WD SUVs for Cognito leveling kits. Used on these older vehicles where the shock was not designed to be the droop...

Cognito Adjustable Front Limit Strap Kit for 99-06 Chevrolet and GMC 1500 2WD/4WD (torsion bar front end) trucks and 00-06 GM 1500 2WD/4WD SUVs with lift kits that have 6 Inch tall sub-frames. Used on these older vehicles where the shock was not designed...

Cognito Adjustable Front Limit Strap Kit for 99-06 Chevrolet and GMC 1500 2WD/4WD (torsion bar front end) trucks and 00-06 GM 1500 2WD/4WD SUVs with Cognito 7-9 Inch lift. Used on these older vehicles where the shock was not designed to be the droop...

Cognito Adjustable Front Limit Strap Kit for 99-06 Chevrolet and GMC 1500 2WD/4WD (torsion bar front end) trucks and 00-06 GM 1500 2WD/4WD SUVs with Cognito 10-12 Inch lift. Used on these older vehicles where the shock was not designed to be the droop...

Cognito Adjustable Front Limit Strap Kit is for 01-10 Chevrolet and GMC 1500HD/2500/2500HD/3500/3500HD 2WD/4WD trucks, 01-13 2500 2WD/4WD SUVs and 03-09 Hummer H2 and H2 SUTs for Cognito leveling kits. This kit is used when there is no front shock in the...

Cognito Adjustable Front Limit Strap Kit is for 01-10 Chevrolet and GMC 1500HD/2500/2500HD/3500/3500HD 2WD/4WD trucks, 01-13 2500 2WD/4WD SUVs and 03-09 Hummer H2 and H2 SUTs with Cognito 10-12 Inch lift. This kit is used when there is no front shock in...

Cognito Adjustable Front Limit Strap Kit for 01-10 Chevrolet and GMC 1500HD/2500/2500HD/3500/3500HD 2WD/4WD trucks and 01-13 2500 2WD/4WD SUVs for Cognito 4-6 Inch non-torsion bar drop lift. This kit is used when there is no front shock in the stock...

Cognito Adjustable Front Limit Strap Kit for 01-10 Chevrolet and GMC 1500HD/2500/2500HD/3500/3500HD 2WD/4WD trucks, 01-13 2500 2WD/4WD SUVs and 03-09 Hummer H2 and H2 SUTs for lift kits that have 6 Inch tall sub-frames. This kit is used when there is no...

Cognito Adjustable Front Limit Strap Kit for 01-10 Chevrolet and GMC 1500HD/2500/2500HD/3500/3500HD 2WD/4WD trucks and 01-13 2500 2WD/4WD SUVs for Cognito 7-9 Inch lift. This kit is used when there is no front shock in the stock location to limit the...

Cognito Front Lower Shock Mount Bracket for 01-10 Chevrolet and GMC 1500HD/2500/2500HD/3500/3500HD 2WD/4WD trucks, 01-13 Chevy and GMC 2WD/4WD 2500 SUVs and 03-09 GM Hummer H2 and H2 SUTs.Add's length of the front shocks for leveling applications where...

Cognito Allison Transmission bracket for 05-19 Chevrolet and GMC 2500HD/3500HD 4WD trucks (equipped with 6 speed Allison Only). This bracket provides additional clearance around the CV head on Cognito drivelines by relocating the shift linkage. Made in...

Cognito Carrier Bearing Spacer 2-3 Inch for GM HDs and Ford Super Duty trucks. Powder coated semi-gloss black. Made in the USA.Details:Carrier Bearing Spacer 2-3 Inch for GM HDs and Ford Super Duty TrucksDiameter: 2-3 InchFinish: PowdercoatColor:...

Cognito Carrier Bearing Spacer 3-4 Inch for GM HDs and Ford Super Duty trucks. Powder coated semi-gloss black. Made in the USA.Details:Carrier Bearing Spacer 3-4 Inch for GM HDs and Ford Super Duty TrucksDiameter: 3-4 InchFinish: PowdercoatColor:...

Fox Reservoir Mounting Clamp for all 2.0 Fox Remote Reservoir shocks. Black anodized clamp with laser etched Fox logo. 1 clamp needed per shock.Details:Attractively anodized and laser etched Aluminum Reservoir Mounting ClampWorks with all 2.0 diameter...

Cognito CV Front Driveline Kit For 4-Inch 7-Inch 10-Inch Lifts On 2020-2021 Silverado/Sierra 2500HD/3500HD Duramax. This direct bolt in driveline features a 1310 series double cardan CV and it is made in the USA.

CSS-C5-7 | CST DUAL SHOCK BRACKETS / BLACK BILLET RESERVOIR CLAMPS | 2011-2019 CHEVY/GMC HD TRUCKS

11" U-Bolt Kit / 2011-15 GM 2500HD (3/4 x 3.25 x 11 Square)

9.5" U-Bolt Kit (9/16 x 3.5 x 9.5 Round)

8" U-Bolt Kit (1/2 x 2.5 x 8.5 Square)

ICON 78705 2001+ Chevrolet 2500HD - Front CV Drive Shaft - Allison Transmission

ICON 78708 2007+ Chevrolet 2500HD - Transmission Shift Linkage Relocation Bracket Kit