My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New Account
Warning: This product can expose you to chemicals that are known to the State of California to cause cancer. For more information, visit www.P65warnings.ca.gov.
Edge EAS pressure sensors come equipped with the proper wires and connectors to plug right into the Universal Sensor Input system. This will save you time and money on cutting, splicing, and crimping wire terminals to connect the sensor. Edge Accessory System pressure sensors can be used to monitor boost psi, fuel rail pressure, airbag pressure, lift pump pressure, pre and post intercooler pressure, and much more.
Edge Products
The EAS Universal Sensor Input provides the ability to read any 0-5 volt signal and translate that signal a meaningful value for display on the Edge CS or CTS. This means you can add custom...
Edge Products
The Edge Accessory System (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories, daisy-chain style, to the CS and CTS platform...
Edge Products
The EAS Control Kit gives user the ability to monitor EGTs and adds the power switch to control multiple accessories with an On/Off digital power switch. The EGT probe is a sensor that allows...
Edge Products
If your vehicle is not equipped with an outside temperature sensor then this is a must have! The EAS Ambient Temperature Sensor is a -40°F to 230°F Waterproof 0.2” diameter sensor ready to plug into...
Edge Products
The EAS Temperature Sensor is a -40°F to 300°F 1/8” NPT supplied with the connectors to plug directly into Edge’s Universal Sensor Input System. Using Edge’s Temperature Sensor you can monitor...
Edge Products
Insight is the #1 preferred digital gauge monitor in the market today, used by daily drivers and enthusiasts everywhere. Engineered to be the most comprehensive, state-of-the-art, multi-gauge...
Edge Products
The EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn, can cause engine damage. This kit is...
Edge Products
The EAS Competition Kit gives users the ability to monitor EGTs and add an additional 0-100 PSIg boost and -40F to 300F temp sensors for ultimate control. This kit is designed for those truck owners...
Edge Products
This is a tremendous new feature for truck owners! Customers can now hook up accessories like aftermarket lights, air compressors, etc. and engage them from the CTS. Install the new switch and use...
Edge Products
The EAS Universal Sensor Input provides the ability to read any 0-5 volt signal and translate that signal a meaningful value for display on the Edge CS or CTS. This means you can add custom...
Edge Products
The EAS Control Kit gives user the ability to monitor EGTs and adds the power switch to control multiple accessories with an On/Off digital power switch. The EGT probe is a sensor that allows...
