Pusher Intakes

Pusher High Mount Compound Turbo System for 2003-2016 Dodge Cummins Trucks

Pusher Low Mount Compound Turbo System for 1998.5-02 Dodge 24v Pickups

Pusher pre and post intercooler intake system for Cummins 5.9L turbo diesel engines in 1991.5-1993 Dodge Ram trucks. Features This intake system offers a 77% gain in flow over the factory system. Upgrades the stock 2.5” intake to a...

Pusher two piece intake manifold for the 7.3L Powerstroke turbo diesel engines in 1999.5-2003 Ford Superduty trucks. Features The Pusher 7.3L Powerstroke manifold splits the poorly designed one piece factory manifold in two pieces. This...

The Pusher 24VSWCA Intake Manifold & Cross-Air for your 03-07 Dodge 5.9L Cummins taps into existing ports, one at the front and rear of the intake plenum. By splitting off the driver-side intercooler tube and creating two parallel paths of air flow...

The Pusher Passenger-Side Intercooler Tube for the 2013-2014 Cummins 6.7L is built around 3.5" mandrel-bent tubing and is a perfect complement to the 3.5" Pusher MEGA Intake System. This tube increases airflow by 73% over the factory 2.75"...

Pusher Cross-Air for Cummins 5.9L turbo diesel engines in 2003-2007 Dodge Ram trucks. Features The Pusher Cross-Air taps into two existing ports, one at the front and rear of the intake plenum. By splitting off the driver-side intercooler tube...

Pusher intake system for Cummins 5.9L turbo diesel engines in 1991.5-1993 Dodge Ram trucks. Features This intake system offers a 77% gain in flow over the factory system. Upgrades the stock 2.5” intake to a full 3" Pusher Intake System on...

All Pusher intake manifolds can be used with or without the factory heater grid.  Fully TIG welded 3" mandrel bent tubing, with a 1/2" thick flange and 1/4" thick dipstick mount. This intake comes standard with instructions, a factory Cummins...

The Pusher intercooler tube kit for the 2013-2018 Cummins 6.7L is built around 3.5" mandrel bent tubing and increase airflow by 35% over the factory 2.75" intake plumbing. This kit also includes heavy duty 4-ply silicone couplers and stainless T-bolt...

The Pusher 12VS 3" Intake Manifold for your 94-98 Dodge 5.9L Cummins is built from fully tig-welded 3" mandrel bent tubing. Designed to increase airflow, spool-up, engine efficiency and throttle response, this intake elbow features a 1/2" thick flange...

Full 3.5" post intercooler intake system for Cummins 5.9 liter turbo diesel engines in 2003-2007 Dodge Ram pickup trucks.

The Pusher Cross-Air taps into an existing port at the rear of the intake plenum. By splitting off the boost tube and creating another parallel path of air flow in addition to the stock plumbing, cylinders 5, and 6 can be better supplied with air...

The Pusher intercooler tube kit for the 2010-2012 Cummins 6.7L is built around 3.5" mandrel-bent .060" thick tubing. These tubes increase airflow by 35% over the factory 2.4" ID plastic intake plumbing. This kit also includes heavy-duty 4-ply silicone...

Pusher 3.5" MEGA driver-side intercooler tube for Cummins 6.7L turbo diesel engines in 2007.5-2009 Dodge Ram trucks. Features The Pusher intercooler tube kit for the 2007.5-2009 Cummins 6.7L is built around 3.5" mandrel bent .060" thick tubing...