Billet Input Shaft;Increase transmission durability with either stock or Billet input, output and intermediate shafts and hubs. Billet shafts, that are rated up to 300M and 300 Maraging, are designed...
Warning: This product can expose you to chemicals that are known to the State of California to cause cancer. For more information, visit www.P65warnings.ca.gov.
The ATS 3049102164 Billet Input Shaft for your 94-07 Dodge 5.9L Cummins is the backbone of your automatic transmission. It is the first hard part to bring power into the transmission and transmit that power to the wheels. With no dampening or power loss other than the torque converter, the input shaft has a lot to handle. Now add power, weight from a trailer, bigger tires (and in some cases all these things together) and you will be well beyond what that factory shaft was designed for.
The theory behind billet shafts is not quite what you may have in mind. The key to success is not to make the shaft "stronger" necessarily, but give it the ability to absorb more torsional load. The way we do this is by using billet shafts, they have the ability to rotate further without breaking. This is going to give the transmission more "give" and allow it to transmit more torque and more load without breaking.
Along those lines, breaking an input shaft can be catastrophic to your transmission. Sometime when the shaft breaks, your truck will simply stop moving and it needs a new input shaft. Other times, when that shaft breaks, it can take out your torque converter, front pump, and front seal as well. Obviously this is going to be a very costly repair. Then add on top of that labor time, fluids, new gaskets, and seals, and you can quickly see how this can add to the cost fairly quickly.
It is simply good insurance to hold reliable power in your transmission, to add at minimum a billet input shaft.
Diesel Performance Converters
DPC 47-48 Std. Billet Input shaft
The Sun Coast 618-HSX Billet Input Shaft your 1994-2007 Dodge 5.9L Cummins has been designed for those higher horsepower engines. Machined from 300 Maraging AMS 6541 material, this shaft is designed...
Billet Input Shaft; 300 Maraging Shaft Material;Increase transmission durability with either stock or Billet input, output and intermediate shafts and hubs. Billet shafts, that are rated up to 300M...
ATS Diesel Performance
Best way to keep your transmission cool is with an aluminum finned extra capacity transmission pan, such as this unit from ATS that holds an additional 5 quarts over the stock pan. This is a...
SunCoast Converters, Inc. was established in 1989 as a two-man operation in the back of a transmission shop. Today, SunCoast has grown to over forty employees and over 70,000 sq. ft. of room to...
ATS Diesel Performance
Flex Plate, Cummins 1994 - 2007, 5.9L Diesel, Billet, Fits 47/8-RH/E, SFI approved SN-