Features & Benefits
- Easy, 100% Bolt-on installation
- Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
- Heavy duty radius arm drop brackets provide correct caster and will maintain your stock driving characteristics.
- Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
- Steel lift blocks with built-in bump stop provide level stance from front to rear
- Standard NX2 Nitro shocks with vehicle-specific valving for better control
- Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road
Improve the ride and create more tire clearance on your 2011-2016
Ford Super Duty F250 and F350 gas truck and install this 6-inch lift kit
from BDS. Designed to improve stance, performance, and capability, this
kit includes everything necessary to set your truck up right with
clearance for up to 37" tires.
Up front the lift kit includes gas-specific Pro-Ride coil springs,
heavy-duty radius arm drop brackets, forged drop pitman arm and track
bar bracket for steering correction, sway bar relocation, brake line
brackets, and custom-tuned nitrogen charged shocks.
In the rear this kit utilizes a replacement GlideRide leaf springs
with integrated overload leaf, u-bolts, brake line brackets and a
matching set of NX2 Nitro or FOX Performance shocks.
Pro-Ride Coil Springs
A pair of full-length, gas-specific, Pro-Ride coil springs are
supplied to provide the correct lift height and smooth, predictable ride
across various terrains.
BDS Glide-Ride Leaf Springs
Built to outperform, BDS engineered the Glide-Ride leaf springs into a
multi-leaf progressive spring rate design that provides a smooth ride
with any load. This is accomplished with an exclusive triple-stage leaf
spring design where the main leaf pack is broken into two stages:
- First, the primary three leafs are functional with no additional
load in the vehicle for excellent everyday?ride quality. As moderate
loads are applied, the secondary leafs are engaged.
- Second, if the truck is fully loaded, the bottom overload is engaged
for maximum hauling capacity. This setup allows your truck to maintain
ride quality unloaded without sacrificing payload.
Upgrading to BDS Glide-Ride leaf springs will reduce axle wrap and provide flexibility throughout the suspension cycle.
Rear Lift Option
This lift system retains the factory rear blocks with the addition of
the new BDS leaf springs to achieve a level stance. Choose the height
of your factory lift blocks for proper u-bolt length.
Shock Option
NX2 Nitro Series
- Nitrogen-charged
- Twin-tube design
- 10-stage velocity-sensitive valving
- Dual-welded ends for increased strength
- 1-3/8-inch high-flow piston
- Self-lubricating seals
- Silver powder coat finish
Recommended Tires & Wheels
- 37 x 12.5 with 17 x 9 and 4.5 in. Backspace
- 37 x 12.5 with 18 x 9 and 4.5 in. Backspace
- 37 x 12.5 with 20 x 9 and 4.5 in. Backspace
Vehicle Fitment
2011-2016 Ford F250/F350 4WD Gas with Factory 2" Rear Blocks
Important Notes
- Front exhaust modification may be required to clear front drive shaft (gas only).
- If equipped with 2-piece driveshaft, a driveshaft alignment kit may be required.
- Although extremely rare, front driveline vibration may occur.
- If equipped with rear sway bar, #123009 required.
- U-bolts will not work on dually.
Kit Includes
- Ford F250/350 6in Rear Spring (003629 x2)
- 2011-2016 Ford F250/F350 Rear Box Kit -- 2" Factory Block (013608)
- 11 Ford F250/350 6in Box Kit (013610)
- 2005-2016 Ford F250/F350 6in (Gas) Coil Kit (033612)
- Shock- 27.40 x 16.20 x 2-3/8 - S50/EB2 (85750 x2)
- Shock- 33.00 x 19.25 x 2-3/8 - EB1/EB1 (85760 x2)
