| 
This high performance product is intended SOLELY for closed-course racing use and is not street legal in ANY state. This product cannot be used on any vehicles registered or certified for highway use. Please check your local, state, and federal laws before purchasing! Will cause check engine lights if not used with an H&S emissions delete tuner. - Fits 2011 Ford 6.7L Powerstroke
This EGR kit is designed to remove the EGR Assembly from your 2011 6.7L Powerstroke. This will remove the EGR Cooler, manifold pipes, coolant lines, and all EGR related electronics from your truck. Comes with all necessary block off plates, plugs, clamps, etc. - Allows removal of the EGR assembly
- Includes an EGT solution for monitoring temperatures (uses EGT sensor removed from DPF)
- Clean up the engine bay
- Remove unnecessary heat retention under the hood
- Comes complete with step by step instructions and color pictures
The Manifold block off plate is also a great location to install an aftermarket pyrometer. With the reverse head design on the scorpion, it makes it very difficult to find a place to install a pyrometer. This location will allow you to use an aftermarket pyrometer without drilling or modifying any factory parts. - One Exhaust Manifold Block-off Plate, Pre-welded for an EGT sensor
- One Intake Block-off Plate
- One Coolant Block-off Plate
- One 1” Hose Clamp
- One Straight Barbed Fitting
- One Vacuum Cap
- One Pressure Sensor Bracket
- One Pressure Sensor Bracket Hardware
- Two 3/4” Coolant Caps
- Three 8mm Bolts
- Three 8mm Washers
- Three Zip-Ties
| 
