Achieving horsepower levels above 500hp is often not possible with a single CP3 high pressure  fuel pump on common rail injection systems and often results in high EGT’s. The BD Dual CP3 Kit comes complete for an installation of a second CP3 injection pump that combined with the stock pump will deliver enough fuel for up to 1000 RWHP

 

Rear Wheel Horse Power

 

and 28,000 psi of fuel pressure (more than  stock systems can handle). The addition of a second pump also results in much less load on the single pump, and, if one pump fails the other will keep the engine running.

The Cummins Engine Control Unit request for the volume and pressure of fuel is monitored by BD’s electronic controller wired into the system and will provide volume requested with or without an increase in pressure. The pumps are easily able to respond to higher pressure requested by a tuner and consistent high volume fuel supply is available for large injectors and extreme levels of power. The two pumps share and supply uniform balanced delivery without any flow disturbances.

The kit is available with or without a new second CP3 pump.